Photo - Primary
User 2
User 3
User 1

UMI Performance 82-92 GM F-Body Tunnel Mounted Trq. Arm Fits T5 700R4- No Loop - Red

$540.82
In Stock Pre order Out of stock
Add to Wishlist
Details
This torque arm set-up is designed to remove the front mounting point of the torque arm off the transmission, protecting the tail shaft from damage. This torque arm is supplied with pivot brackets that allow (2) settings to allow easy instant center adjustments. By simply moving the torque arm into the next location you can automatically change the instant center point of the vehicle. This is very crucial on low to mid horse-power cars and can easily lower 60-foot times. This set-up bolts to existing floor pan holes using 0.188" thick mild steel CNC machined mounting plates and metric grade 10.9 hardware. The complete cross brace is constructed of 0.120" thick rectangular tubing and attaches to the torque arm using 0.250" thick mild steel mounting pivot plates with Grade 8 hardware. The torque arm is attached to the supplied cross brace using an Energy Suspension polyurethane bushing set-up on both the supplied cross brace and torque arm. Polyurethane was chosen as a mounting point to keep road noise at a minimum and eliminate unwanted "clunks" found with other set-ups available. The grease-able polyurethane bushings absorb road irregularities and protect noise from entering the passenger compartment. The rear mounting points feature 0.375" thick CNC machined mounting plates and are appropriately drilled to fit your stock rear as well as aftermarket 12-Bolt and 9" Rear-end housings. This set-up requires no welding or drilling and can be installed with basic hand tools; this is a complete bolt-in design!

This Part Fits:

Year Make Model Submodel
1988 Chevrolet Camaro Base
1982-1986 Chevrolet Camaro Berlinetta
1985-1990 Chevrolet Camaro Iroc-Z
1987 Chevrolet Camaro LT
1989-1992 Chevrolet Camaro RS
1992 Chevrolet Camaro RS Heritage Edition
1982-1987 Chevrolet Camaro Sport
1982-1987,1991-1992 Chevrolet Camaro Z28
1992 Chevrolet Camaro Z28 Heritage Edition
1982 Chevrolet Camaro Z28 Indianapolis 500 Pace Car
1982-1992 Pontiac Firebird Base
1989-1992 Pontiac Firebird Formula
1982-1986 Pontiac Firebird S/E
1982-1992 Pontiac Firebird Trans Am
1989-1992 Pontiac Firebird Trans Am GTA
1989 Pontiac Firebird Trans Am GTA SE
Refund Policy

Bull Strap products are the highest grade cut and sewn items in the automotive industry. We are proud to support USA workers in our bid to manufacture right here in the United States.

WARRANTY

Bull Strap guarantees all products to be free from manufacturer defects for all items for one year, and any color fading (where mentioned) for 2 years from the time of purchase. In the event of a product failure, Bull Strap will decide whether that product should be repaired or replaced after reviewing photos submitted by the customer. Bull Strap will then provide a return shipping label for any product in which the material or stitching were determined to be the root cause. Once received, the product will be repaired or replaced and returned to the customer at no cost.

REFUND POLICY

Seat covers and other custom made items, retain all warranties listed above, but cannot be refunded or exchanged at any time

On non-custom items, if within 30 days of purchase directly from Bull Strap, a customer would like to return an unused product with no modifications, and where the item(s) can be considered 'new in box', the customer can email us at info@bullstrap.com or call us at 951-319-4008. The will be a 15% restocking fee subtracted from any returned items. Once processed, the customer must ship the product back and submit the tracking information. Bull Strap will issue a full refund minus the 15% restocking fee once the item(s) is/are received and determined to be in 'Brand New' condition. NOTE: If a customer ordered Bull Strap products from a dealer, the customer must go through this process directly with the dealer the product was ordered from.

As always, we strive to provide the best product and customer service available...but we are definitely not perfect. If at any time, you have any issues, please contact us, so we can address any problems you may have. Thanks!

Shipping Policy

Coming Soon

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)