SPL Parts 2014+ BMW M2/M3/M4 (F8X) Rear Upper Control Arms - Bull Strap
SPL Parts 2014+ BMW M2/M3/M4 (F8X) Rear Upper Control Arms - Bull Strap
SPL Parts 2014+ BMW M2/M3/M4 (F8X) Rear Upper Control Arms - Bull Strap
SPL Parts 2014+ BMW M2/M3/M4 (F8X) Rear Upper Control Arms - Bull Strap
SPL Parts 2014+ BMW M2/M3/M4 (F8X) Rear Upper Control Arms - Bull Strap
SPL Parts 2014+ BMW M2/M3/M4 (F8X) Rear Upper Control Arms - Bull Strap
SPL Parts 2014+ BMW M2/M3/M4 (F8X) Rear Upper Control Arms - Bull Strap
SPL Parts 2014+ BMW M2/M3/M4 (F8X) Rear Upper Control Arms - Bull Strap
SPL Parts 2014+ BMW M2/M3/M4 (F8X) Rear Upper Control Arms - Bull Strap
SPL Parts 2014+ BMW M2/M3/M4 (F8X) Rear Upper Control Arms - Bull Strap
SPL Parts 2014+ BMW M2/M3/M4 (F8X) Rear Upper Control Arms - Bull Strap

SPL Parts 2014+ BMW M2/M3/M4 (F8X) Rear Upper Control Arms

$899.24 $828.75 SAVE 8%
In Stock Pre order Out of stock
Add to Wishlist
Details
BMW F8X adjustable Rear Upper Arms (RUA) are an absolute necessity to maintain proper rear camber and reduce tire wear on the street and track. The stock BMW setup has an aggressive camber curve through bump travel, which is very apparent on lowered cars. Excess negative camber causes premature tire wear on the inside edge, and reduced traction on acceleration while too little camber will limit rear grip while cornering. Our Rear Upper Arms provide a wide adjustment range for precise rear camber alignment that is easily optimized for street or track driving while eliminating bushing deflection with smooth articulating Teflon lined rod ends in place of the soft factory rubber bushings. Our kit replaces the factory links commonly referred to as the rear wishbone and rear guide links. BMW F8X Rear Upper Arms are gun drilled 2024 Aluminum links to reduce weight, then are Black Anodized to prevent corrosion and provide a durable finish. Our 360 degree 6061-T6 Aluminum Rotating Clamp design allows for quick, precise adjustment. Our Clamps tightened down with Blue Anodized Titanium Socket Head Cap Screws gives easy access to adjust camber settings, shaving off even more unsprung weight without compromising strength. Our Rear Upper Links provide superior performance, durability, and ease of adjustment. Long gone are the days of fumbling with wrenches to tighten jam nuts while trying to trying to keep your bearings oriented correctly. FK Spherical Bearings and Rod Ends are manufactured in Connecticut and utilize a Teflon liner to provide quiet operation, lower friction, smooth articulation, and eliminates bushing deflection under load. Sold as a complete kit for one car (4 total arms). Made in the USA.

This Part Fits:

Year Make Model Submodel
2016-2018 BMW M2 Base
2019-2021 BMW M2 Competition
2020 BMW M2 CS
2015-2018 BMW M3 Base
2015-2020 BMW M4 Base
2019-2020 BMW M4 CS
2016 BMW M4 GTS
Refund Policy

Bull Strap products are the highest grade cut and sewn items in the automotive industry. We are proud to support USA workers in our bid to manufacture right here in the United States.

WARRANTY

Bull Strap guarantees all products to be free from manufacturer defects for all items for one year, and any color fading (where mentioned) for 2 years from the time of purchase. In the event of a product failure, Bull Strap will decide whether that product should be repaired or replaced after reviewing photos submitted by the customer. Bull Strap will then provide a return shipping label for any product in which the material or stitching were determined to be the root cause. Once received, the product will be repaired or replaced and returned to the customer at no cost.

REFUND POLICY

Seat covers and other custom made items, retain all warranties listed above, but cannot be refunded or exchanged at any time

On non-custom items, if within 30 days of purchase directly from Bull Strap, a customer would like to return an unused product with no modifications, and where the item(s) can be considered 'new in box', the customer can email us at info@bullstrap.com or call us at 951-319-4008. The will be a 15% restocking fee subtracted from any returned items. Once processed, the customer must ship the product back and submit the tracking information. Bull Strap will issue a full refund minus the 15% restocking fee once the item(s) is/are received and determined to be in 'Brand New' condition. NOTE: If a customer ordered Bull Strap products from a dealer, the customer must go through this process directly with the dealer the product was ordered from.

As always, we strive to provide the best product and customer service available...but we are definitely not perfect. If at any time, you have any issues, please contact us, so we can address any problems you may have. Thanks!

Shipping Policy

Coming Soon

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)