SPL Parts 2013+ Subaru BRZ/Toyota 86 Front Lower Control Arms - Bull Strap
SPL Parts 2013+ Subaru BRZ/Toyota 86 Front Lower Control Arms - Bull Strap
SPL Parts 2013+ Subaru BRZ/Toyota 86 Front Lower Control Arms - Bull Strap
SPL Parts 2013+ Subaru BRZ/Toyota 86 Front Lower Control Arms - Bull Strap
SPL Parts 2013+ Subaru BRZ/Toyota 86 Front Lower Control Arms - Bull Strap
SPL Parts 2013+ Subaru BRZ/Toyota 86 Front Lower Control Arms - Bull Strap
SPL Parts 2013+ Subaru BRZ/Toyota 86 Front Lower Control Arms - Bull Strap
SPL Parts 2013+ Subaru BRZ/Toyota 86 Front Lower Control Arms - Bull Strap
SPL Parts 2013+ Subaru BRZ/Toyota 86 Front Lower Control Arms - Bull Strap
SPL Parts 2013+ Subaru BRZ/Toyota 86 Front Lower Control Arms - Bull Strap

SPL Parts 2013+ Subaru BRZ/Toyota 86 Front Lower Control Arms

$1,449.39 $1,325.84 SAVE 9%
In Stock Pre order Out of stock
Add to Wishlist
Details
The SPL Front Lower Control Arm (FLCA) kit is the ultimate tool for setting up the front end of the GR86 / BRZ / GT86 / FR-S for track, drifting, or street use. Adjust track width, camber, caster, roll center, and anti-dive to increase front grip, gain tire clearance, greatly improve tire wear at the track, reduce body roll, and more, in addition to eliminating all of the bushing flex that causes vague and undesirable handling characteristics in corners and under braking.Camber AdjustmentOne of the biggest improvements to cornering grip you can make is increasing the front camber angle from the weak factory spec (0.0 to -0.75°) to a more proper -2.5° to -4.0° of front camber. This also will significantly improve tire life by reducing heavy wear on the outer portion of the tread that occurs due to insufficient camber angle while cornering. Elongating the lower arm will add more camber without the need for adjustable camber plates or eccentric bolts that could potentially slip. However, pairing the SPL LCAs with camber plates allows you more adjustability options for inner and outer tire clearance as well as elongating the track width while retaining a specific camber angle.Caster AdjustmentAnother important alignment spec is caster angle. Caster angle is particularly helpful on a McPherson strut suspension because it increases the amount of camber that is gained as steering angle is increased. It also improves the centering torque on the steering wheel for straight line stability. The OEM spec is a little over 5.0° which compared to other platforms is a bit on the low side. The SPL arms will allow most setups to run 7.0+° of caster, depending on wheel clearance. The result is better grip mid-corner.

This Part Fits:

Year Make Model Submodel
2013-2016 Scion FR-S Base
2013-2020,2025 Subaru BRZ Limited
2013-2019,2025 Subaru BRZ Premium
2015 Subaru BRZ Series.Blue
2019 Subaru BRZ Series.Gray
2016 Subaru BRZ Series.HyperBlue
2017 Subaru BRZ Series.Yellow
2018,2020,2025 Subaru BRZ TS
2017-2020 Toyota 86 Base
2018-2020 Toyota 86 GT
2020 Toyota 86 Hakone Edition
2017 Toyota 86 Special Edition
2019 Toyota 86 TRD Special Edition
2023 Toyota GR86 10th Anniversary Special Edition
2022-2025 Toyota GR86 Base
2025 Toyota GR86 Hakone Edition
2022-2025 Toyota GR86 Premium
2024 Toyota GR86 TRUENO Edition
Refund Policy

Bull Strap products are the highest grade cut and sewn items in the automotive industry. We are proud to support USA workers in our bid to manufacture right here in the United States.

WARRANTY

Bull Strap guarantees all products to be free from manufacturer defects for all items for one year, and any color fading (where mentioned) for 2 years from the time of purchase. In the event of a product failure, Bull Strap will decide whether that product should be repaired or replaced after reviewing photos submitted by the customer. Bull Strap will then provide a return shipping label for any product in which the material or stitching were determined to be the root cause. Once received, the product will be repaired or replaced and returned to the customer at no cost.

REFUND POLICY

Seat covers and other custom made items, retain all warranties listed above, but cannot be refunded or exchanged at any time

On non-custom items, if within 30 days of purchase directly from Bull Strap, a customer would like to return an unused product with no modifications, and where the item(s) can be considered 'new in box', the customer can email us at info@bullstrap.com or call us at 951-319-4008. The will be a 15% restocking fee subtracted from any returned items. Once processed, the customer must ship the product back and submit the tracking information. Bull Strap will issue a full refund minus the 15% restocking fee once the item(s) is/are received and determined to be in 'Brand New' condition. NOTE: If a customer ordered Bull Strap products from a dealer, the customer must go through this process directly with the dealer the product was ordered from.

As always, we strive to provide the best product and customer service available...but we are definitely not perfect. If at any time, you have any issues, please contact us, so we can address any problems you may have. Thanks!

Shipping Policy

Coming Soon

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)