Snow Performance Stg 1 Boost Cooler F/I Water Injection Kit (Incl. SS Braided Line and 4AN Fittings) - Bull Strap
Snow Performance Stg 1 Boost Cooler F/I Water Injection Kit (Incl. SS Braided Line and 4AN Fittings) - Bull Strap
Snow Performance Stg 1 Boost Cooler F/I Water Injection Kit (Incl. SS Braided Line and 4AN Fittings) - Bull Strap
Snow Performance Stg 1 Boost Cooler F/I Water Injection Kit (Incl. SS Braided Line and 4AN Fittings) - Bull Strap
Snow Performance Stg 1 Boost Cooler F/I Water Injection Kit (Incl. SS Braided Line and 4AN Fittings) - Bull Strap
Snow Performance Stg 1 Boost Cooler F/I Water Injection Kit (Incl. SS Braided Line and 4AN Fittings) - Bull Strap
Snow Performance Stg 1 Boost Cooler F/I Water Injection Kit (Incl. SS Braided Line and 4AN Fittings) - Bull Strap
Snow Performance Stg 1 Boost Cooler F/I Water Injection Kit (Incl. SS Braided Line and 4AN Fittings) - Bull Strap

Snow Performance Stg 1 Boost Cooler F/I Water Injection Kit (Incl. SS Braided Line and 4AN Fittings)

$671.01 $498.73 SAVE 26%
In Stock Pre order Out of stock
Add to Wishlist
Details
Race gas quality fuel on pump gas! Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! The Snow Performance Stage 1 Boost Cooler water-methanol injection kit is available for all forced induction applications (supercharged/turbocharged) and uses a adjustable boost switch to inject a fixed amount of water-methanol into the system until boost goes below the switch set point. Proven to deliver 30-70 HP increases to all forced induction applications! This makes it a good choice for low to medium boost setups (1-15 PSI) and vehicles with a positive displacement supercharger looking for an octane enhancement and cooler intake charge. Activation can also be set up through any other user-chosen switch, such as a full throttle switch, nitrous switch, etc. Comes with 4AN fittings and stainless steel braided line to mount pump/tank in engine bay of vehicle. For trunk mount options see Part# SNO-40014-BRD, SNO-40012-BRD.
Refund Policy

Bull Strap products are the highest grade cut and sewn items in the automotive industry. We are proud to support USA workers in our bid to manufacture right here in the United States.

WARRANTY

Bull Strap guarantees all products to be free from manufacturer defects for all items for one year, and any color fading (where mentioned) for 2 years from the time of purchase. In the event of a product failure, Bull Strap will decide whether that product should be repaired or replaced after reviewing photos submitted by the customer. Bull Strap will then provide a return shipping label for any product in which the material or stitching were determined to be the root cause. Once received, the product will be repaired or replaced and returned to the customer at no cost.

REFUND POLICY

Seat covers and other custom made items, retain all warranties listed above, but cannot be refunded or exchanged at any time

On non-custom items, if within 30 days of purchase directly from Bull Strap, a customer would like to return an unused product with no modifications, and where the item(s) can be considered 'new in box', the customer can email us at info@bullstrap.com or call us at 951-319-4008. The will be a 15% restocking fee subtracted from any returned items. Once processed, the customer must ship the product back and submit the tracking information. Bull Strap will issue a full refund minus the 15% restocking fee once the item(s) is/are received and determined to be in 'Brand New' condition. NOTE: If a customer ordered Bull Strap products from a dealer, the customer must go through this process directly with the dealer the product was ordered from.

As always, we strive to provide the best product and customer service available...but we are definitely not perfect. If at any time, you have any issues, please contact us, so we can address any problems you may have. Thanks!

Shipping Policy

Coming Soon

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)