Skunk2 Pro Series Mitsubishi Evo VII/VIII/IX Intake Manifold (Race Only) - Bull Strap
Skunk2 Pro Series Mitsubishi Evo VII/VIII/IX Intake Manifold (Race Only) - Bull Strap
Skunk2 Pro Series Mitsubishi Evo VII/VIII/IX Intake Manifold (Race Only) - Bull Strap
Skunk2 Pro Series Mitsubishi Evo VII/VIII/IX Intake Manifold (Race Only) - Bull Strap
Skunk2 Pro Series Mitsubishi Evo VII/VIII/IX Intake Manifold (Race Only) - Bull Strap
Skunk2 Pro Series Mitsubishi Evo VII/VIII/IX Intake Manifold (Race Only) - Bull Strap
Skunk2 Pro Series Mitsubishi Evo VII/VIII/IX Intake Manifold (Race Only) - Bull Strap

Skunk2 Pro Series Mitsubishi Evo VII/VIII/IX Intake Manifold (Race Only)

$585.21 $576.42 SAVE 2%
In Stock Pre order Out of stock
Add to Wishlist
Details
The intake manifold solution street-driven Evo VIII-IX owners have been waiting for is here. Skunk2's newly designed Evo Pro Series Intake Manifold was designed with 'street enthusiasts' who utilize turbochargers as small as the factory unit in mind and want more power without sacrificing mid-range performance. Skunk2's all-new, cast-aluminum Evo Pro Series Intake Manifold—which was tested and developed on the company's own Evo Time Attack race car—is a direct-fit replacement and offers significant horsepower and torque gains without compromising mid-range power output. Conventional large-plenum, short-runner intake manifolds provide top-end power gains but suffer in the mid-range. Not Skunk2's. Its all-new Pro Series Intake Manifold features OEM-length runners with larger bores and a special tapered design as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end gains. Peak gains as high as 33+ whp have been realized when paired with Pro Series Throttle Bodies with positive results across the board, beginning as low as 3,200 rpm. Pro Series Intake Manifolds also feature thicker castings when compared to the OEM piece, which leaves plenty of room for porting, and each runner exit is machined and hand-finished to best match the cylinder head's ports. The Pro Series Intake Manifold's unique design increases wave scavenging effects at the engine's ideal operating range, which allow for a broad increase in usable power. Skunk2's Evo Pro Series Intake Manifold is a simple bolt-on affair. Unlike other intake manifolds, Skunk2's incorporates the factory configuration, leaving the throttle body in its original location, which means the original intercooler piping and hoses can be reused. Pro Series Intake Manifolds also include the necessary provisions for the Evo's brake booster line, MDP sensor, and vacuum accessories (EGR valve excluded)

This Part Fits:

Year Make Model Submodel
1995-1998 Mitsubishi Eclipse GST
1995-1998 Mitsubishi Eclipse GSX
1996-1998 Mitsubishi Eclipse Spyder GST
2003-2006 Mitsubishi Lancer Evolution
2005-2006 Mitsubishi Lancer Evolution MR
2005-2006 Mitsubishi Lancer Evolution RS
2006 Mitsubishi Lancer Evolution SE
Refund Policy

Bull Strap products are the highest grade cut and sewn items in the automotive industry. We are proud to support USA workers in our bid to manufacture right here in the United States.

WARRANTY

Bull Strap guarantees all products to be free from manufacturer defects for all items for one year, and any color fading (where mentioned) for 2 years from the time of purchase. In the event of a product failure, Bull Strap will decide whether that product should be repaired or replaced after reviewing photos submitted by the customer. Bull Strap will then provide a return shipping label for any product in which the material or stitching were determined to be the root cause. Once received, the product will be repaired or replaced and returned to the customer at no cost.

REFUND POLICY

Seat covers and other custom made items, retain all warranties listed above, but cannot be refunded or exchanged at any time

On non-custom items, if within 30 days of purchase directly from Bull Strap, a customer would like to return an unused product with no modifications, and where the item(s) can be considered 'new in box', the customer can email us at info@bullstrap.com or call us at 951-319-4008. The will be a 15% restocking fee subtracted from any returned items. Once processed, the customer must ship the product back and submit the tracking information. Bull Strap will issue a full refund minus the 15% restocking fee once the item(s) is/are received and determined to be in 'Brand New' condition. NOTE: If a customer ordered Bull Strap products from a dealer, the customer must go through this process directly with the dealer the product was ordered from.

As always, we strive to provide the best product and customer service available...but we are definitely not perfect. If at any time, you have any issues, please contact us, so we can address any problems you may have. Thanks!

Shipping Policy

Coming Soon

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)