Skunk2 Honda/Acura EG/DC Alpha Series Rear Lower Control Arm Set - Gold - Bull Strap
Skunk2 Honda/Acura EG/DC Alpha Series Rear Lower Control Arm Set - Gold - Bull Strap
Skunk2 Honda/Acura EG/DC Alpha Series Rear Lower Control Arm Set - Gold - Bull Strap
Skunk2 Honda/Acura EG/DC Alpha Series Rear Lower Control Arm Set - Gold - Bull Strap
Skunk2 Honda/Acura EG/DC Alpha Series Rear Lower Control Arm Set - Gold - Bull Strap
Skunk2 Honda/Acura EG/DC Alpha Series Rear Lower Control Arm Set - Gold - Bull Strap
Skunk2 Honda/Acura EG/DC Alpha Series Rear Lower Control Arm Set - Gold - Bull Strap

Skunk2 Honda/Acura EG/DC Alpha Series Rear Lower Control Arm Set - Gold

$236.33
In Stock Pre order Out of stock
Add to Wishlist
Details
Skunk2 has done it again. While others are busy imitating our LCA's, Skunk2 engineers have spent years of extensive R & D to revolutionize a product that was once thought to be dialed in. Skunk2 is proud to announce the release of its Alpha Series Lower Control Arms for the '88-'95 Civic/ CRX and '90-'01 Integra. The Alpha Series LCA's are based off of the same technology the company's been using in its own race cars for 20 years and are a must-have for enthusiast looking to fine-tune their suspension for maximum handling performance while keeping budget in mind. Skunk2's Rear Lower Control Arms are direct replacements, maintain OEM suspension geometry, and are ideal for street and race applications. When deciding on a material to base our new design on, we chose very carefully, as there are many inferior annealed and cheap versions of aluminum available on the market today. We chose 6061-T6 because of its excellent strength to weight ratio. With an ultimate tensile strength of over 42,000 PSI, and fatigue strength of 14,000 psi for 500 million cycles – we knew this would be perfect for the Alpha Series Lower Control Arms. The result of our re-engineered lower control arm is a 6061-T6 Forged Aluminum LCA, that is 15% lighter and 7% stronger than our previous generation of LCA's. Accurate suspension geometry is maintained under the most aggressive driving conditions using high load steel spherical bearings on the trailing arm side and tuned durometer elastomeric bushings for the sub frame side of the LCA. Delrin bushings are utilized at the shock mounting position for their low friction and minimal deflection for unparalleled dynamic shock control. Using this specific combination of bushings allows the most comfort and control under any driving conditions. Properly designed suspension components must be strong and functional first and aesthetically pleasing second. Skunk2's Rear Lower Control Arms are both.

This Part Fits:

Year Make Model Submodel
1990-1993,1997-2001 Acura Integra GS
1992-2001 Acura Integra GS-R
1990-2001 Acura Integra LS
1990-1998 Acura Integra RS
1988-1991 Honda Civic Base
1992-1995 Honda Civic CX
1988-1995 Honda Civic DX
1990-1995 Honda Civic EX
1988-1995 Honda Civic LX
1989-1995 Honda Civic Si
1992-1995 Honda Civic VX
1993-1997 Honda Civic del Sol S
1993-1997 Honda Civic del Sol Si
1994-1997 Honda Civic del Sol VTEC
1988 Honda CRX DX
1988-1991 Honda CRX HF
1988-1991 Honda CRX Si
Refund Policy

Bull Strap products are the highest grade cut and sewn items in the automotive industry. We are proud to support USA workers in our bid to manufacture right here in the United States.

WARRANTY

Bull Strap guarantees all products to be free from manufacturer defects for all items for one year, and any color fading (where mentioned) for 2 years from the time of purchase. In the event of a product failure, Bull Strap will decide whether that product should be repaired or replaced after reviewing photos submitted by the customer. Bull Strap will then provide a return shipping label for any product in which the material or stitching were determined to be the root cause. Once received, the product will be repaired or replaced and returned to the customer at no cost.

REFUND POLICY

Seat covers and other custom made items, retain all warranties listed above, but cannot be refunded or exchanged at any time

On non-custom items, if within 30 days of purchase directly from Bull Strap, a customer would like to return an unused product with no modifications, and where the item(s) can be considered 'new in box', the customer can email us at info@bullstrap.com or call us at 951-319-4008. The will be a 15% restocking fee subtracted from any returned items. Once processed, the customer must ship the product back and submit the tracking information. Bull Strap will issue a full refund minus the 15% restocking fee once the item(s) is/are received and determined to be in 'Brand New' condition. NOTE: If a customer ordered Bull Strap products from a dealer, the customer must go through this process directly with the dealer the product was ordered from.

As always, we strive to provide the best product and customer service available...but we are definitely not perfect. If at any time, you have any issues, please contact us, so we can address any problems you may have. Thanks!

Shipping Policy

Coming Soon

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)