Skunk2 1996-00 Honda Civic Black Series Lower Control Arm - Bull Strap
Skunk2 1996-00 Honda Civic Black Series Lower Control Arm - Bull Strap
Skunk2 1996-00 Honda Civic Black Series Lower Control Arm - Bull Strap
Skunk2 1996-00 Honda Civic Black Series Lower Control Arm - Bull Strap
Skunk2 1996-00 Honda Civic Black Series Lower Control Arm - Bull Strap
Skunk2 1996-00 Honda Civic Black Series Lower Control Arm - Bull Strap
Skunk2 1996-00 Honda Civic Black Series Lower Control Arm - Bull Strap

Skunk2 1996-00 Honda Civic Black Series Lower Control Arm

$337.34
In Stock Pre order Out of stock
Add to Wishlist
Details
Skunk2 has done it again. While others are busy imitating our LCA's, Skunk2 engineers have spent years of extensive R & D to revolutionize a product that was once thought to be dialed in. Skunk2 is proud to announce the release of its Ultra Series Lower Control Arms for the '88-'95 Civic/ CRX and '90-'01 Integra. The Ultra Series LCA's are based off of the same technology the company's been using in its own race cars for 20 years. Skunk2's Rear Lower Control Arms are direct replacements, maintain OEM suspension geometry, and are ideal for street and race applications. The Ultra Series Lower Control Arm offers the hardcore racer and discerning enthusiast, the very best of the best. In a market full of 'Me Too' Product, and recycled, annealed lower control arms, we took the Lower Control Arm back to the drawing board. Often not used due to the higher cost, we chose 7075-T6 because of its exceptional strength to weight ratio and fatigue strength. With an ultimate tensile strength of over 78,000 PSI, and fatigue strength of 23,000 psi for 500 million cycles – This is the perfect material for our game changing Ultra LCA's. The result of our hard work is a 7075-T6 Forged Aluminum LCA, that is 19% lighter and 27% stronger than our previous generation of LCA's. Accurate suspension geometry is maintained under the most aggressive driving conditions using high load steel spherical bearings on the trailing arm side and tuned durometer elastomeric bushings for the sub frame side of the LCA. Delrin bushings are utilized at the shock mounting position for their low friction and minimal deflection for unparalleled dynamic shock control. Using this select combination of bushings allows the most comfort and control under any driving conditions. For hardcore race level handling, we have also added the option to replace the sub frame side elastomeric bushing with a high load steel spherical bushing for a no-nonsense track car. The bushing change can be done in minutes with basic tools

This Part Fits:

Year Make Model Submodel
1996-2000 Honda Civic CX
1996-2000 Honda Civic DX
1996-2000 Honda Civic EX
1998-2000 Honda Civic GX
1996-2000 Honda Civic HX
1996-2000 Honda Civic LX
1999-2000 Honda Civic Si
1999 Honda Civic Value Package
Refund Policy

Bull Strap products are the highest grade cut and sewn items in the automotive industry. We are proud to support USA workers in our bid to manufacture right here in the United States.

WARRANTY

Bull Strap guarantees all products to be free from manufacturer defects for all items for one year, and any color fading (where mentioned) for 2 years from the time of purchase. In the event of a product failure, Bull Strap will decide whether that product should be repaired or replaced after reviewing photos submitted by the customer. Bull Strap will then provide a return shipping label for any product in which the material or stitching were determined to be the root cause. Once received, the product will be repaired or replaced and returned to the customer at no cost.

REFUND POLICY

Seat covers and other custom made items, retain all warranties listed above, but cannot be refunded or exchanged at any time

On non-custom items, if within 30 days of purchase directly from Bull Strap, a customer would like to return an unused product with no modifications, and where the item(s) can be considered 'new in box', the customer can email us at info@bullstrap.com or call us at 951-319-4008. The will be a 15% restocking fee subtracted from any returned items. Once processed, the customer must ship the product back and submit the tracking information. Bull Strap will issue a full refund minus the 15% restocking fee once the item(s) is/are received and determined to be in 'Brand New' condition. NOTE: If a customer ordered Bull Strap products from a dealer, the customer must go through this process directly with the dealer the product was ordered from.

As always, we strive to provide the best product and customer service available...but we are definitely not perfect. If at any time, you have any issues, please contact us, so we can address any problems you may have. Thanks!

Shipping Policy

Coming Soon

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)