When a recovery situation hits on a remote trail, the weakest point in the system determines the outcome. The Mishimoto Front Recovery Points for the 2024+ Toyota Tacoma are built to not be that point - forged alloy steel construction rated at 17,000 lbs working load limit each, engineered for the full spectrum of modern recovery loads from static pulls to kinetic rope extractions.----Forged alloy steel aligns the grain structure of the metal, delivering tensile strength that resists bending and cracking under dynamic recovery forces where cast or stamped recovery points give way. Recessed bolt heads sit flush with the recovery point surface, eliminating the hardware exposure that causes bolt-head shear when the front end contacts a rock or obstacle. Electrogalvanizing seals the steel before powder coat is applied, blocking moisture and salt at the base metal for long-term corrosion resistance. Black dacromet hardware carries the same corrosion protection through every fastener, preventing rust migration and seizing at the mounting interface.----The opening geometry accepts both d-ring and soft shackles without modification, supporting either steel or synthetic rigging hardware. Available in powder coat black or red. Direct fit for the 2024+ Toyota Tacoma with no drilling, cutting, or modification required.----For complete front and rear recovery capability, pair with the Mishimoto Rear Recovery Points (MMTH-TAC-24-R), rated at 18,500 lbs WLL each and built with the same forged alloy steel construction for the rear bumper mounting location. Backed by the Mishimoto Lifetime Warranty.
User 1This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Toyota | Tacoma | Limited |
| 2024-2026 | Toyota | Tacoma | SR |
| 2024-2026 | Toyota | Tacoma | SR5 |
| 2024-2026 | Toyota | Tacoma | Trailhunter |
| 2024-2026 | Toyota | Tacoma | TRD Off-Road |
| 2024-2026 | Toyota | Tacoma | TRD PreRunner |
| 2024-2026 | Toyota | Tacoma | TRD Pro |
| 2024-2026 | Toyota | Tacoma | TRD Sport |
Bull Strap products are the highest grade cut and sewn items in the automotive industry. We are proud to support USA workers in our bid to manufacture right here in the United States.
WARRANTY
Bull Strap guarantees all products to be free from manufacturer defects for all items for one year, and any color fading (where mentioned) for 2 years from the time of purchase. In the event of a product failure, Bull Strap will decide whether that product should be repaired or replaced after reviewing photos submitted by the customer. Bull Strap will then provide a return shipping label for any product in which the material or stitching were determined to be the root cause. Once received, the product will be repaired or replaced and returned to the customer at no cost.
REFUND POLICY
Seat covers and other custom made items, retain all warranties listed above, but cannot be refunded or exchanged at any time
On non-custom items, if within 30 days of purchase directly from Bull Strap, a customer would like to return an unused product with no modifications, and where the item(s) can be considered 'new in box', the customer can email us at info@bullstrap.com or call us at 951-319-4008. The will be a 15% restocking fee subtracted from any returned items. Once processed, the customer must ship the product back and submit the tracking information. Bull Strap will issue a full refund minus the 15% restocking fee once the item(s) is/are received and determined to be in 'Brand New' condition. NOTE: If a customer ordered Bull Strap products from a dealer, the customer must go through this process directly with the dealer the product was ordered from.
As always, we strive to provide the best product and customer service available...but we are definitely not perfect. If at any time, you have any issues, please contact us, so we can address any problems you may have. Thanks!
Coming Soon