## MagnaFlow BRE Exhaust Kit 87-96 Ford Bronco
If you're driving a 2087–2096 Ford Bronco and you're serious about performance, you already know that factory exhaust was engineered to a price point, not a performance target. MagnaFlow takes a completely different approach.
MagnaFlow has been engineering performance exhaust systems in Chula Vista, California since 1981, and their commitment to straight-through muffler technology has made them one of the most recognized names in performance exhaust. MagnaFlow's stainless steel construction and clean sound profile have earned them OEM relationships with manufacturers who trust their quality standards — a direct reflection of the engineering rigor applied to every system they produce. Whether you're looking for the deep rumble of a truck exhaust or a refined performance note for a sports car, MagnaFlow engineers the sound frequency range of every product to match the application.
The result is this exhaust — engineered with the 2087–2096 Ford Bronco specifically in mind, matching spring rates, mounting geometry, and component sizing to what this platform actually demands under real-world conditions.
## Engineering and Technology
MagnaFlow's straight-through muffler design uses stainless steel perforated core tubing wrapped in stainless steel wool that absorbs sound while allowing gases to flow freely. This design produces significantly less backpressure than conventional baffled mufflers, which is directly measurable as horsepower and torque gains on a dyno. All MagnaFlow systems are constructed from 409 or 304 stainless steel — the grade varies by product line — and all welding is performed using TIG process for maximum joint strength and corrosion resistance.
For the 2087–2096 Ford Bronco, these engineering principles translate into direct performance improvements. Ford Bronco owners running this exhaust consistently report improved throttle response, noticeable low-end torque gains, and the kind of exhaust note that actually improves the driving experience rather than just being louder.
## Who This Is For
This MagnaFlow exhaust is designed for 2087–2096 Ford Bronco owners who use their vehicles seriously. Whether your primary use is performance driving, daily driving, towing, this component was engineered to deliver in your specific application.
Factory exhaust systems are engineered for emissions compliance and cost reduction, not for extracting maximum performance from your engine. The factory Bronco exhaust leaves measurable horsepower and torque on the table, and does it with a muted, compressed exhaust note that doesn't do justice to what's actually happening under the hood. This MagnaFlow system corrects both issues.
Ideal for: Performance driving · Daily driving · Towing · Truck builds
## Why Upgrade Matters for 2087–2096 Ford Bronco
Factory exhaust components are engineered to a budget and a set of average expectations. The engineering team responsible for the Bronco spec had to balance cost, mass-market appeal, regulatory compliance, and warranty exposure — none of which prioritize the kind of performance a serious Bronco owner actually needs.
The factory Bronco exhaust system uses a muffler design optimized for quiet operation and regulatory compliance, not for extracting performance. The result is measurable backpressure at wide-open throttle — backpressure that directly costs you horsepower and torque. A MagnaFlow exhaust removes that restriction while engineering the exhaust tone for quality and character, not just volume.
## Installation and Compatibility
This MagnaFlow exhaust is designed to fit the 2087–2096 Ford Bronco using factory mounting positions and existing hangers. No cutting or welding is required on most configurations. Hardware is included, and all systems are designed to work with factory catalytic converters to maintain emissions compliance.
This product is designed and tested specifically for the 2087–2096 2087–2096 Ford Bronco. If your vehicle has factory performance packages or factory Bronco options that may affect fitment, verify compatibility using your vehicle's build sheet or contact technical support before ordering.
## Complete Your Build with Bull Strap
If you're upgrading your Ford Bronco's exhaust system, your suspension travel and drivetrain protection deserve the same attention. Bull Strap limit straps are the final piece of the suspension puzzle — engineered and manufactured in the USA to control maximum droop travel and protect your axles, CV joints, and brake lines from overextension under articulation.
Bull Strap limit straps are made in the USA from high-tenacity webbing and proprietary hardware and are the choice of professional fabricators and serious off-road builders who understand that uncontrolled droop is how you destroy expensive components. Pair them with your MagnaFlow exhaust upgrade for a complete, properly engineered suspension system.
## Frequently Asked Questions
**Will this MagnaFlow exhaust fit my 2087–2096 2087–2096 Ford Bronco?**
Yes — this product is designed and validated for the 2087–2096 Ford Bronco (2087–2096). Fitment data is verified against factory specifications. If you have a Bronco with unusual factory options or prior modifications, verify those don't affect the installation before ordering.
**How does MagnaFlow's exhaust compare to the factory Bronco equivalent?**
The factory exhaust was designed to a budget and an average use case. MagnaFlow's engineering prioritizes performance, durability, and real-world function over cost minimization. In practical terms, you'll notice the difference in throttle response, power delivery under load, and the quality of the exhaust tone across the RPM range.
**Is this exhaust covered by a warranty?**
MagnaFlow stands behind the quality of their products with manufacturer warranty coverage. Specific warranty terms vary by product line — refer to the product documentation or contact MagnaFlow directly for warranty details applicable to this part. MagnaFlow's warranty reflects their confidence in the quality of their manufacturing and materials.
**Can I install this exhaust myself, or do I need a professional?**
Installation difficulty varies by exhaust and vehicle. Exhaust installations are typically straightforward for experienced home mechanics with access to a lift. The main requirement is a safe way to access the vehicle's underside with adequate clearance to manipulate the new components into place.
## Build Quality and Value
MagnaFlow products are not the cheapest option for your 2087–2096 Ford Bronco. They are not designed to be. Budget components in critical systems — exhaust components that your vehicle's capability and, in some cases, safety depend on — create a false economy. The cost of a component failure in a critical system far exceeds the delta between a quality product and a cut-rate alternative. MagnaFlow prices reflect genuine engineering investment, quality materials, precise manufacturing, and the validation process that ensures the product performs exactly as specified across its full service life.
For 2087–2096 Ford Bronco owners who depend on their vehicles in demanding conditions, the calculation is straightforward: invest in components that perform when you need them to, last as long as the vehicle, and back that promise with manufacturer warranty coverage. This MagnaFlow exhaust meets that standard.
For professional builders, fleet managers, and serious enthusiasts who track performance across their builds, MagnaFlow's consistent engineering standards mean predictable outcomes. When you specify MagnaFlow for a Ford Bronco build, you know what you're getting.
## Real-World Performance Context
MagnaFlow products are validated in the real world, not just on engineering benches. The exhaust hardware you choose for your 2087–2096 Ford Bronco will be asked to perform across a wide range of conditions — temperature extremes, sustained load cycles, rough terrain, and the cumulative stress of thousands of miles in demanding environments. This exhaust is engineered to deliver consistent, repeatable performance across all of those conditions.
Exhaust systems on trucks and performance vehicles face conditions that expose the quality differences between systems immediately. High temperatures from sustained high-RPM operation, exposure to road salt and moisture, vibration from engine and drivetrain harmonics, and the thermal cycling between hot and cold all stress exhaust system joints, hangers, and tubing. MagnaFlow's construction standards and materials are chosen specifically to handle these conditions for the long term.
**What makes the 2087–2096 2087–2096 Ford Bronco a good platform for exhaust upgrades?**
The 2087–2096 Ford Bronco has an excellent foundation — Ford engineers the Bronco with robust frame construction, capable stock drivetrain components, and factory exhaust specs that are genuinely competent for average use. The reason aftermarket upgrades make such a difference is precisely because the factory engineers did their job well — the platform can handle more than the factory spec delivers. A MagnaFlow exhaust lets you access that latent capability.
**How long does this exhaust last?**
MagnaFlow components are designed for service lives that match or exceed the factory equivalent. Proper installation, periodic inspection, and maintenance appropriate to your usage intensity are the primary variables in longevity. Owners running their 2087–2096 Ford Bronco primarily on-road under moderate loads can expect many years of service without attention. Owners running aggressive off-road applications should inspect exhaust components more frequently and follow the manufacturer's maintenance recommendations.
**Will this affect my 2087–2096 Ford Bronco factory warranty?**
Under the Magnuson-Moss Warranty Act, a manufacturer cannot void your vehicle warranty simply because you installed aftermarket components, unless they can demonstrate the aftermarket part caused the specific failure. That said, review your warranty terms and understand the interaction between your aftermarket components and any open factory warranty claims before installation.
If you're driving a 2087–2096 Ford Bronco and you're serious about performance, you already know that factory exhaust was engineered to a price point, not a performance target. MagnaFlow takes a completely different approach.
MagnaFlow has been engineering performance exhaust systems in Chula Vista, California since 1981, and their commitment to straight-through muffler technology has made them one of the most recognized names in performance exhaust. MagnaFlow's stainless steel construction and clean sound profile have earned them OEM relationships with manufacturers who trust their quality standards — a direct reflection of the engineering rigor applied to every system they produce. Whether you're looking for the deep rumble of a truck exhaust or a refined performance note for a sports car, MagnaFlow engineers the sound frequency range of every product to match the application.
The result is this exhaust — engineered with the 2087–2096 Ford Bronco specifically in mind, matching spring rates, mounting geometry, and component sizing to what this platform actually demands under real-world conditions.
## Engineering and Technology
MagnaFlow's straight-through muffler design uses stainless steel perforated core tubing wrapped in stainless steel wool that absorbs sound while allowing gases to flow freely. This design produces significantly less backpressure than conventional baffled mufflers, which is directly measurable as horsepower and torque gains on a dyno. All MagnaFlow systems are constructed from 409 or 304 stainless steel — the grade varies by product line — and all welding is performed using TIG process for maximum joint strength and corrosion resistance.
For the 2087–2096 Ford Bronco, these engineering principles translate into direct performance improvements. Ford Bronco owners running this exhaust consistently report improved throttle response, noticeable low-end torque gains, and the kind of exhaust note that actually improves the driving experience rather than just being louder.
## Who This Is For
This MagnaFlow exhaust is designed for 2087–2096 Ford Bronco owners who use their vehicles seriously. Whether your primary use is performance driving, daily driving, towing, this component was engineered to deliver in your specific application.
Factory exhaust systems are engineered for emissions compliance and cost reduction, not for extracting maximum performance from your engine. The factory Bronco exhaust leaves measurable horsepower and torque on the table, and does it with a muted, compressed exhaust note that doesn't do justice to what's actually happening under the hood. This MagnaFlow system corrects both issues.
Ideal for: Performance driving · Daily driving · Towing · Truck builds
## Why Upgrade Matters for 2087–2096 Ford Bronco
Factory exhaust components are engineered to a budget and a set of average expectations. The engineering team responsible for the Bronco spec had to balance cost, mass-market appeal, regulatory compliance, and warranty exposure — none of which prioritize the kind of performance a serious Bronco owner actually needs.
The factory Bronco exhaust system uses a muffler design optimized for quiet operation and regulatory compliance, not for extracting performance. The result is measurable backpressure at wide-open throttle — backpressure that directly costs you horsepower and torque. A MagnaFlow exhaust removes that restriction while engineering the exhaust tone for quality and character, not just volume.
## Installation and Compatibility
This MagnaFlow exhaust is designed to fit the 2087–2096 Ford Bronco using factory mounting positions and existing hangers. No cutting or welding is required on most configurations. Hardware is included, and all systems are designed to work with factory catalytic converters to maintain emissions compliance.
This product is designed and tested specifically for the 2087–2096 2087–2096 Ford Bronco. If your vehicle has factory performance packages or factory Bronco options that may affect fitment, verify compatibility using your vehicle's build sheet or contact technical support before ordering.
## Complete Your Build with Bull Strap
If you're upgrading your Ford Bronco's exhaust system, your suspension travel and drivetrain protection deserve the same attention. Bull Strap limit straps are the final piece of the suspension puzzle — engineered and manufactured in the USA to control maximum droop travel and protect your axles, CV joints, and brake lines from overextension under articulation.
Bull Strap limit straps are made in the USA from high-tenacity webbing and proprietary hardware and are the choice of professional fabricators and serious off-road builders who understand that uncontrolled droop is how you destroy expensive components. Pair them with your MagnaFlow exhaust upgrade for a complete, properly engineered suspension system.
## Frequently Asked Questions
**Will this MagnaFlow exhaust fit my 2087–2096 2087–2096 Ford Bronco?**
Yes — this product is designed and validated for the 2087–2096 Ford Bronco (2087–2096). Fitment data is verified against factory specifications. If you have a Bronco with unusual factory options or prior modifications, verify those don't affect the installation before ordering.
**How does MagnaFlow's exhaust compare to the factory Bronco equivalent?**
The factory exhaust was designed to a budget and an average use case. MagnaFlow's engineering prioritizes performance, durability, and real-world function over cost minimization. In practical terms, you'll notice the difference in throttle response, power delivery under load, and the quality of the exhaust tone across the RPM range.
**Is this exhaust covered by a warranty?**
MagnaFlow stands behind the quality of their products with manufacturer warranty coverage. Specific warranty terms vary by product line — refer to the product documentation or contact MagnaFlow directly for warranty details applicable to this part. MagnaFlow's warranty reflects their confidence in the quality of their manufacturing and materials.
**Can I install this exhaust myself, or do I need a professional?**
Installation difficulty varies by exhaust and vehicle. Exhaust installations are typically straightforward for experienced home mechanics with access to a lift. The main requirement is a safe way to access the vehicle's underside with adequate clearance to manipulate the new components into place.
## Build Quality and Value
MagnaFlow products are not the cheapest option for your 2087–2096 Ford Bronco. They are not designed to be. Budget components in critical systems — exhaust components that your vehicle's capability and, in some cases, safety depend on — create a false economy. The cost of a component failure in a critical system far exceeds the delta between a quality product and a cut-rate alternative. MagnaFlow prices reflect genuine engineering investment, quality materials, precise manufacturing, and the validation process that ensures the product performs exactly as specified across its full service life.
For 2087–2096 Ford Bronco owners who depend on their vehicles in demanding conditions, the calculation is straightforward: invest in components that perform when you need them to, last as long as the vehicle, and back that promise with manufacturer warranty coverage. This MagnaFlow exhaust meets that standard.
For professional builders, fleet managers, and serious enthusiasts who track performance across their builds, MagnaFlow's consistent engineering standards mean predictable outcomes. When you specify MagnaFlow for a Ford Bronco build, you know what you're getting.
## Real-World Performance Context
MagnaFlow products are validated in the real world, not just on engineering benches. The exhaust hardware you choose for your 2087–2096 Ford Bronco will be asked to perform across a wide range of conditions — temperature extremes, sustained load cycles, rough terrain, and the cumulative stress of thousands of miles in demanding environments. This exhaust is engineered to deliver consistent, repeatable performance across all of those conditions.
Exhaust systems on trucks and performance vehicles face conditions that expose the quality differences between systems immediately. High temperatures from sustained high-RPM operation, exposure to road salt and moisture, vibration from engine and drivetrain harmonics, and the thermal cycling between hot and cold all stress exhaust system joints, hangers, and tubing. MagnaFlow's construction standards and materials are chosen specifically to handle these conditions for the long term.
**What makes the 2087–2096 2087–2096 Ford Bronco a good platform for exhaust upgrades?**
The 2087–2096 Ford Bronco has an excellent foundation — Ford engineers the Bronco with robust frame construction, capable stock drivetrain components, and factory exhaust specs that are genuinely competent for average use. The reason aftermarket upgrades make such a difference is precisely because the factory engineers did their job well — the platform can handle more than the factory spec delivers. A MagnaFlow exhaust lets you access that latent capability.
**How long does this exhaust last?**
MagnaFlow components are designed for service lives that match or exceed the factory equivalent. Proper installation, periodic inspection, and maintenance appropriate to your usage intensity are the primary variables in longevity. Owners running their 2087–2096 Ford Bronco primarily on-road under moderate loads can expect many years of service without attention. Owners running aggressive off-road applications should inspect exhaust components more frequently and follow the manufacturer's maintenance recommendations.
**Will this affect my 2087–2096 Ford Bronco factory warranty?**
Under the Magnuson-Moss Warranty Act, a manufacturer cannot void your vehicle warranty simply because you installed aftermarket components, unless they can demonstrate the aftermarket part caused the specific failure. That said, review your warranty terms and understand the interaction between your aftermarket components and any open factory warranty claims before installation.
Details
BRExhaust Direct-Fit Replacement Exhaust Kit 106-0381 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 106-0381’s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0381 includes (3) 2.25in. U-Bolt Clamps and interchanges with OE parts F4TZ-5230-E, F5TZ-5230-BAA, F5TZ-5230-BDA. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0381 features durable Aluminized Steel construction and is covered by a 2 year warranty.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1983-1993 | Ford | Bronco | Custom |
| 1985-1996 | Ford | Bronco | Eddie Bauer |
| 1990-1996 | Ford | Bronco | XL |
| 1983 | Ford | Bronco | XLS |
| 1984-1992,1994-1996 | Ford | Bronco | XLT |
| 1983,1993 | Ford | Bronco | XLT Lariat |
| 1992 | Ford | Bronco | XLT Nite |
| 1995-1996 | Ford | Bronco | XLT Sport |
Refund Policy
Bull Strap products are the highest grade cut and sewn items in the automotive industry. We are proud to support USA workers in our bid to manufacture right here in the United States.
WARRANTY
Bull Strap guarantees all products to be free from manufacturer defects for all items for one year, and any color fading (where mentioned) for 2 years from the time of purchase. In the event of a product failure, Bull Strap will decide whether that product should be repaired or replaced after reviewing photos submitted by the customer. Bull Strap will then provide a return shipping label for any product in which the material or stitching were determined to be the root cause. Once received, the product will be repaired or replaced and returned to the customer at no cost.
REFUND POLICY
Seat covers and other custom made items, retain all warranties listed above, but cannot be refunded or exchanged at any time
On non-custom items, if within 30 days of purchase directly from Bull Strap, a customer would like to return an unused product with no modifications, and where the item(s) can be considered 'new in box', the customer can email us at info@bullstrap.com or call us at 951-319-4008. The will be a 15% restocking fee subtracted from any returned items. Once processed, the customer must ship the product back and submit the tracking information. Bull Strap will issue a full refund minus the 15% restocking fee once the item(s) is/are received and determined to be in 'Brand New' condition. NOTE: If a customer ordered Bull Strap products from a dealer, the customer must go through this process directly with the dealer the product was ordered from.
As always, we strive to provide the best product and customer service available...but we are definitely not perfect. If at any time, you have any issues, please contact us, so we can address any problems you may have. Thanks!
Shipping Policy
Coming Soon