K&N 2016-2017 Ford Focus RS 2.3L Typhoon Short Ram Intake - Bull Strap
K&N 2016-2017 Ford Focus RS 2.3L Typhoon Short Ram Intake - Bull Strap
K&N 2016-2017 Ford Focus RS 2.3L Typhoon Short Ram Intake - Bull Strap
K&N 2016-2017 Ford Focus RS 2.3L Typhoon Short Ram Intake - Bull Strap
K&N 2016-2017 Ford Focus RS 2.3L Typhoon Short Ram Intake - Bull Strap
K&N 2016-2017 Ford Focus RS 2.3L Typhoon Short Ram Intake - Bull Strap
K&N 2016-2017 Ford Focus RS 2.3L Typhoon Short Ram Intake - Bull Strap
K&N 2016-2017 Ford Focus RS 2.3L Typhoon Short Ram Intake - Bull Strap
K&N 2016-2017 Ford Focus RS 2.3L Typhoon Short Ram Intake - Bull Strap
K&N 2016-2017 Ford Focus RS 2.3L Typhoon Short Ram Intake - Bull Strap
K&N 2016-2017 Ford Focus RS 2.3L Typhoon Short Ram Intake - Bull Strap
K&N 2016-2017 Ford Focus RS 2.3L Typhoon Short Ram Intake - Bull Strap
K&N 2016-2017 Ford Focus RS 2.3L Typhoon Short Ram Intake - Bull Strap
K&N 2016-2017 Ford Focus RS 2.3L Typhoon Short Ram Intake - Bull Strap
K&N 2016-2017 Ford Focus RS 2.3L Typhoon Short Ram Intake - Bull Strap

K&N 2016-2017 Ford Focus RS 2.3L Typhoon Short Ram Intake

$387.80
In Stock Pre order Out of stock
Add to Wishlist
Details
The K&N 69-3539TB Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Ford Focus models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothens and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-3539TB air intake comes with a black rubber topped K&N high-flow air filter and a heat shield that installs using the factory mounting locations. A molded scoop funnels outside air towards the filter. Air is then directed through the intake tube into the engine's throttle body for a guaranteed power gain. The intake tube has an attractive blue powder-coat finish to match the car's badging and it accommodates the factory air pressure sensor. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. Installation can be done using common tools. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the vehicle applications and specific CARB status for each vehicle and air intake.
Installation Instructions
User 1


This Part Fits:

Year Make Model Submodel
2016-2018 Ford Focus RS
Refund Policy

Bull Strap products are the highest grade cut and sewn items in the automotive industry. We are proud to support USA workers in our bid to manufacture right here in the United States.

WARRANTY

Bull Strap guarantees all products to be free from manufacturer defects for all items for one year, and any color fading (where mentioned) for 2 years from the time of purchase. In the event of a product failure, Bull Strap will decide whether that product should be repaired or replaced after reviewing photos submitted by the customer. Bull Strap will then provide a return shipping label for any product in which the material or stitching were determined to be the root cause. Once received, the product will be repaired or replaced and returned to the customer at no cost.

REFUND POLICY

Seat covers and other custom made items, retain all warranties listed above, but cannot be refunded or exchanged at any time

On non-custom items, if within 30 days of purchase directly from Bull Strap, a customer would like to return an unused product with no modifications, and where the item(s) can be considered 'new in box', the customer can email us at info@bullstrap.com or call us at 951-319-4008. The will be a 15% restocking fee subtracted from any returned items. Once processed, the customer must ship the product back and submit the tracking information. Bull Strap will issue a full refund minus the 15% restocking fee once the item(s) is/are received and determined to be in 'Brand New' condition. NOTE: If a customer ordered Bull Strap products from a dealer, the customer must go through this process directly with the dealer the product was ordered from.

As always, we strive to provide the best product and customer service available...but we are definitely not perfect. If at any time, you have any issues, please contact us, so we can address any problems you may have. Thanks!

Shipping Policy

Coming Soon