K&N 12-18 Jeep Wrangler 3.6L V6 Performance Intake Kit w/ Snorkel - Bull Strap
K&N 12-18 Jeep Wrangler 3.6L V6 Performance Intake Kit w/ Snorkel - Bull Strap
K&N 12-18 Jeep Wrangler 3.6L V6 Performance Intake Kit w/ Snorkel - Bull Strap
K&N 12-18 Jeep Wrangler 3.6L V6 Performance Intake Kit w/ Snorkel - Bull Strap
K&N 12-18 Jeep Wrangler 3.6L V6 Performance Intake Kit w/ Snorkel - Bull Strap
K&N 12-18 Jeep Wrangler 3.6L V6 Performance Intake Kit w/ Snorkel - Bull Strap
K&N 12-18 Jeep Wrangler 3.6L V6 Performance Intake Kit w/ Snorkel - Bull Strap
K&N 12-18 Jeep Wrangler 3.6L V6 Performance Intake Kit w/ Snorkel - Bull Strap

K&N 12-18 Jeep Wrangler 3.6L V6 Performance Intake Kit w/ Snorkel

$660.32
In Stock Pre order Out of stock
Add to Wishlist
Details
The K&N 57-1573 Air Intake system replaces the restrictive factory air filter and air intake housing on specific Jeep Wrangler models. K&N air intakes are designed to dramatically reduce air intake restriction allowing your engine to inhale a larger amount of air than the factory air filter assembly. While this Snorkel kit will not increase the manufacturer suggested water fording limit, it will provide a more constant supply of clean air when driving through extremely dusty conditions. More air means more usable power and acceleration throughout the engine's RPM range. The air intake includes a uniquely designed snorkel system that brings in outside air from an ideal location to allow you to ride your Jeep hard in extreme off-road conditions. Fresh air is directed through the low-restriction snorkel tubing and into a replacement K&N roto-molded air box that contains a K&N high-flow air filter. An aerodynamically engineered intake tube smoothes and straightens the air flow before it goes directly into the engine's throttle body for a guaranteed power gain. The intake tube has provisions to install the stock intake air temperature sensor, and vent (breather) hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicle's existing factory mounting points.
Installation Instructions
User 1


This Part Fits:

Year Make Model Submodel
2016 Jeep Wrangler 75th Anniversary
2012-2017 Jeep Wrangler Rubicon
2012-2017 Jeep Wrangler Sahara
2012-2017 Jeep Wrangler Sport
2016 Jeep Wrangler Sport S
2016 Jeep Wrangler Unlimited 75th Anniversary
2012-2017 Jeep Wrangler Unlimited Rubicon
2012-2017 Jeep Wrangler Unlimited Sahara
2012-2017 Jeep Wrangler Unlimited Sport
2016 Jeep Wrangler Unlimited Sport S
2018 Jeep Wrangler JK Rubicon
2018 Jeep Wrangler JK Sahara
2018 Jeep Wrangler JK Sport
2018 Jeep Wrangler JK Sport S
2018 Jeep Wrangler JK Unlimited Rubicon
2018 Jeep Wrangler JK Unlimited Sahara
2018 Jeep Wrangler JK Unlimited Sport
2018 Jeep Wrangler JK Unlimited Sport S
Refund Policy

Bull Strap products are the highest grade cut and sewn items in the automotive industry. We are proud to support USA workers in our bid to manufacture right here in the United States.

WARRANTY

Bull Strap guarantees all products to be free from manufacturer defects for all items for one year, and any color fading (where mentioned) for 2 years from the time of purchase. In the event of a product failure, Bull Strap will decide whether that product should be repaired or replaced after reviewing photos submitted by the customer. Bull Strap will then provide a return shipping label for any product in which the material or stitching were determined to be the root cause. Once received, the product will be repaired or replaced and returned to the customer at no cost.

REFUND POLICY

Seat covers and other custom made items, retain all warranties listed above, but cannot be refunded or exchanged at any time

On non-custom items, if within 30 days of purchase directly from Bull Strap, a customer would like to return an unused product with no modifications, and where the item(s) can be considered 'new in box', the customer can email us at info@bullstrap.com or call us at 951-319-4008. The will be a 15% restocking fee subtracted from any returned items. Once processed, the customer must ship the product back and submit the tracking information. Bull Strap will issue a full refund minus the 15% restocking fee once the item(s) is/are received and determined to be in 'Brand New' condition. NOTE: If a customer ordered Bull Strap products from a dealer, the customer must go through this process directly with the dealer the product was ordered from.

As always, we strive to provide the best product and customer service available...but we are definitely not perfect. If at any time, you have any issues, please contact us, so we can address any problems you may have. Thanks!

Shipping Policy

Coming Soon

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)