Improve the handling of your lifted Jeep Wrangler JK with JKS Front Control Arm Correction Brackets. Designed for use with 2"-4.5" lift kits the brackets improve control arm operating angle to mimic or improve on factory arm angles as well as improve anti-dive during braking. Lowering the control arm mounting point slightly places the arms closer to the axle mount which corrects caster and geometry caused by the lifted ride height. Two mounting hole positions correct geometry for given lift heights. Heavy duty, 1pc, fully boxed 7GA steel brackets install inside the factory upper and lower control arm mounts with the factory hardware. The fully gusseted design you extra confidence both on and off road. For ultimate performance, Control Arm Correction Brackets can be used with JKS adjustable control arms.
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011 | Jeep | Wrangler | 70th Anniversary |
| 2016 | Jeep | Wrangler | 75th Anniversary |
| 2007-2017 | Jeep | Wrangler | Rubicon |
| 2007-2017 | Jeep | Wrangler | Sahara |
| 2010-2017 | Jeep | Wrangler | Sport |
| 2016 | Jeep | Wrangler | Sport S |
| 2011 | Jeep | Wrangler | Unlimited 70th Anniversary |
| 2016 | Jeep | Wrangler | Unlimited 75th Anniversary |
| 2007-2017 | Jeep | Wrangler | Unlimited Rubicon |
| 2007-2017 | Jeep | Wrangler | Unlimited Sahara |
| 2010-2017 | Jeep | Wrangler | Unlimited Sport |
| 2016 | Jeep | Wrangler | Unlimited Sport S |
| 2007-2010 | Jeep | Wrangler | Unlimited X |
| 2007-2010 | Jeep | Wrangler | X |
| 2018 | Jeep | Wrangler JK | Rubicon |
| 2018 | Jeep | Wrangler JK | Sahara |
| 2018 | Jeep | Wrangler JK | Sport |
| 2018 | Jeep | Wrangler JK | Sport S |
| 2018 | Jeep | Wrangler JK | Unlimited Rubicon |
| 2018 | Jeep | Wrangler JK | Unlimited Sahara |
| 2018 | Jeep | Wrangler JK | Unlimited Sport |
| 2018 | Jeep | Wrangler JK | Unlimited Sport S |
Bull Strap products are the highest grade cut and sewn items in the automotive industry. We are proud to support USA workers in our bid to manufacture right here in the United States.
WARRANTY
Bull Strap guarantees all products to be free from manufacturer defects for all items for one year, and any color fading (where mentioned) for 2 years from the time of purchase. In the event of a product failure, Bull Strap will decide whether that product should be repaired or replaced after reviewing photos submitted by the customer. Bull Strap will then provide a return shipping label for any product in which the material or stitching were determined to be the root cause. Once received, the product will be repaired or replaced and returned to the customer at no cost.
REFUND POLICY
Seat covers and other custom made items, retain all warranties listed above, but cannot be refunded or exchanged at any time
On non-custom items, if within 30 days of purchase directly from Bull Strap, a customer would like to return an unused product with no modifications, and where the item(s) can be considered 'new in box', the customer can email us at info@bullstrap.com or call us at 951-319-4008. The will be a 15% restocking fee subtracted from any returned items. Once processed, the customer must ship the product back and submit the tracking information. Bull Strap will issue a full refund minus the 15% restocking fee once the item(s) is/are received and determined to be in 'Brand New' condition. NOTE: If a customer ordered Bull Strap products from a dealer, the customer must go through this process directly with the dealer the product was ordered from.
As always, we strive to provide the best product and customer service available...but we are definitely not perfect. If at any time, you have any issues, please contact us, so we can address any problems you may have. Thanks!
Coming Soon