## ICON Anza 17x8.5 6x5.5 25mm Offset 5.75in BS 95.1mm Hub Bore Satin Black Wheel
If you're driving a ICON Anza 17x8.5 6x5.5 25mm Offset 5.75in BS 95.1mm Hub Bore Satin Black Wheel and you're serious about performance, you already know that factory suspension was engineered to a price point, not a performance target. ICON Vehicle Dynamics takes a completely different approach.
ICON Vehicle Dynamics engineers every component to perform under the most punishing real-world conditions. Founded by racers and built for serious off-road enthusiasts, ICON has earned its reputation by winning on the roughest terrain on earth — from the brutal desert floors of the Baja 1000 to high-speed Nevada dry lake beds. ICON's engineering team obsesses over damping curves, valving specifications, and chassis geometry so your truck or SUV responds exactly the way you want it to, whether you're hammering through rock gardens at low speed or floating across whoops at triple-digit velocities.
The result is this suspension — engineered with the ICON Anza 17x8.5 6x5.5 25mm Offset 5.75in BS 95.1mm Hub Bore Satin Black Wheel specifically in mind, matching spring rates, mounting geometry, and component sizing to what this platform actually demands under real-world conditions.
## Engineering and Technology
ICON's proprietary triple-rate springs work in concert with their precisely valved monotube shocks to deliver a progressive ride that stays composed whether you're empty or loaded. The external reservoir design allows significantly more oil volume than standard coilover configurations, which directly translates to fade resistance during extended high-heat cycles. Aluminum construction throughout keeps unsprung weight low — critical for maintaining tire contact across broken terrain.
For the ICON Anza 17x8.5 6x5.5 25mm Offset 5.75in BS 95.1mm Hub Bore Satin Black Wheel, these engineering principles translate into direct performance improvements. owners running this suspension consistently report improved body control at highway speeds, better composure over rough terrain, and reduced bottoming under hard cornering loads.
## Who This Is For
This ICON suspension is designed for ICON Anza 17x8.5 6x5.5 25mm Offset 5.75in BS 95.1mm Hub Bore Satin Black Wheel owners who use their vehicles seriously. Whether your primary use is daily driving, overlanding, trail riding, this component was engineered to deliver in your specific application.
Off-road capability starts with suspension. The factory suspension suspension was designed for the average buyer driving average roads — not for the owner who's running loaded to GVW on unimproved forest roads, or who's navigating technical rock terrain where a moment of imprecise suspension response can damage the vehicle or trap it on an obstacle. This suspension closes the gap between what the factory provides and what serious use actually demands.
Ideal for: Daily driving · Overlanding · Trail riding · Desert running · Rock crawling
## Why Upgrade Matters for ICON Anza 17x8.5 6x5.5 25mm Offset 5.75in BS 95.1mm Hub Bore Satin Black Wheel
Factory suspension components are engineered to a budget and a set of average expectations. The engineering team responsible for the factory spec had to balance cost, mass-market appeal, regulatory compliance, and warranty exposure — none of which prioritize the kind of performance a serious truck or SUV owner actually needs.
When you're towing at or near GVW, loaded with gear, or navigating trails where terrain changes second-to-second, the factory suspension is already working at the edge of its design envelope. A properly engineered suspension from ICON gives you headroom — compression and rebound control that doesn't fade under heat, spring rates that maintain geometry under real load, and construction that lasts through conditions the factory spec was never designed to handle.
## Installation and Compatibility
This ICON suspension is designed to fit the ICON Anza 17x8.5 6x5.5 25mm Offset 5.75in BS 95.1mm Hub Bore Satin Black Wheel using the factory mounting points. No cutting, welding, or frame modification is required. Hardware is included, and installation follows the factory service manual torque specifications. Most installations can be completed with a floor jack, jack stands, and standard hand tools.
This product is designed and tested specifically for the ICON Anza 17x8.5 6x5.5 25mm Offset 5.75in BS 95.1mm Hub Bore Satin Black Wheel. If your vehicle has factory performance packages that may affect fitment, verify compatibility using your vehicle's build sheet or contact technical support before ordering.
## Complete Your Build with Bull Strap
If you're upgrading your your vehicle's suspension system, your suspension travel and drivetrain protection deserve the same attention. Bull Strap limit straps are the final piece of the suspension puzzle — engineered and manufactured in the USA to control maximum droop travel and protect your axles, CV joints, and brake lines from overextension under articulation.
Bull Strap limit straps are made in the USA from high-tenacity webbing and proprietary hardware and are the choice of professional fabricators and serious off-road builders who understand that uncontrolled droop is how you destroy expensive components. Pair them with your ICON suspension upgrade for a complete, properly engineered suspension system.
## Frequently Asked Questions
**Will this ICON suspension fit my ICON Anza 17x8.5 6x5.5 25mm Offset 5.75in BS 95.1mm Hub Bore Satin Black Wheel?**
Yes — this product is designed and validated for the ICON Anza 17x8.5 6x5.5 25mm Offset 5.75in BS 95.1mm Hub Bore Satin Black Wheel. Fitment data is verified against factory specifications. If you have a vehicle with unusual factory options or prior modifications, verify those don't affect the installation before ordering.
**How does ICON's suspension compare to the factory OEM equivalent?**
The factory suspension was designed to a budget and an average use case. ICON's engineering prioritizes performance, durability, and real-world function over cost minimization. In practical terms, you'll notice the difference in body control, ride quality, and the ability to maintain traction across varied terrain without the compromise the factory system requires.
**Is this suspension covered by a warranty?**
ICON stands behind the quality of their products with manufacturer warranty coverage. Specific warranty terms vary by product line — refer to the product documentation or contact ICON directly for warranty details applicable to this part. ICON's warranty reflects their confidence in the quality of their manufacturing and materials.
**Can I install this suspension myself, or do I need a professional?**
Installation difficulty varies by suspension and vehicle. Suspension work requires vehicle-specific knowledge and access to appropriate lifting and support equipment. If you're comfortable with suspension disassembly and have a proper lift or quality jack stands, most ICON suspension components can be installed at home. Wheel alignment should always be checked and corrected after any suspension modification.
## Build Quality and Value
ICON products are not the cheapest option for your ICON Anza 17x8.5 6x5.5 25mm Offset 5.75in BS 95.1mm Hub Bore Satin Black Wheel. They are not designed to be. Budget components in critical systems — suspension components that your vehicle's capability and, in some cases, safety depend on — create a false economy. The cost of a component failure in a critical system far exceeds the delta between a quality product and a cut-rate alternative. ICON prices reflect genuine engineering investment, quality materials, precise manufacturing, and the validation process that ensures the product performs exactly as specified across its full service life.
For ICON Anza 17x8.5 6x5.5 25mm Offset 5.75in BS 95.1mm Hub Bore Satin Black Wheel owners who depend on their vehicles in demanding conditions, the calculation is straightforward: invest in components that perform when you need them to, last as long as the vehicle, and back that promise with manufacturer warranty coverage. This ICON suspension meets that standard.
For professional builders, fleet managers, and serious enthusiasts who track performance across their builds, ICON's consistent engineering standards mean predictable outcomes. When you specify ICON for a your vehicle build, you know what you're getting.
## Real-World Performance Context
ICON products are validated in the real world, not just on engineering benches. The suspension hardware you choose for your ICON Anza 17x8.5 6x5.5 25mm Offset 5.75in BS 95.1mm Hub Bore Satin Black Wheel will be asked to perform across a wide range of conditions — temperature extremes, sustained load cycles, rough terrain, and the cumulative stress of thousands of miles in demanding environments. This suspension is engineered to deliver consistent, repeatable performance across all of those conditions.
For ICON Anza 17x8.5 6x5.5 25mm Offset 5.75in BS 95.1mm Hub Bore Satin Black Wheel owners who tow regularly, suspension performance under load is particularly important. An unloaded truck and a fully loaded truck have very different dynamic characteristics, and the suspension component that handles one well doesn't necessarily handle the other without compromise. ICON's engineering for this platform accounts for that real-world load variation, with spring rates and damping curves that perform across the full range of loading conditions you're actually likely to encounter.
**What makes the ICON Anza 17x8.5 6x5.5 25mm Offset 5.75in BS 95.1mm Hub Bore Satin Black Wheel a good platform for suspension upgrades?**
The ICON Anza 17x8.5 6x5.5 25mm Offset 5.75in BS 95.1mm Hub Bore Satin Black Wheel has an excellent foundation — the platform features robust frame construction, capable stock drivetrain components, and factory suspension specs that are genuinely competent for average use. The reason aftermarket upgrades make such a difference is precisely because the factory engineers did their job well — the platform can handle more than the factory spec delivers. A ICON suspension lets you access that latent capability.
**How long does this suspension last?**
ICON components are designed for service lives that match or exceed the factory equivalent. Proper installation, periodic inspection, and maintenance appropriate to your usage intensity are the primary variables in longevity. Owners running their ICON Anza 17x8.5 6x5.5 25mm Offset 5.75in BS 95.1mm Hub Bore Satin Black Wheel primarily on-road under moderate loads can expect many years of service without attention. Owners running aggressive off-road applications should inspect suspension components more frequently and follow the manufacturer's maintenance recommendations.
**Will this affect my ICON Anza 17x8.5 6x5.5 25mm Offset 5.75in BS 95.1mm Hub Bore Satin Black Wheel factory warranty?**
Under the Magnuson-Moss Warranty Act, a manufacturer cannot void your vehicle warranty simply because you installed aftermarket components, unless they can demonstrate the aftermarket part caused the specific failure. That said, review your warranty terms and understand the interaction between your aftermarket components and any open factory warranty claims before installation.
If you're driving a ICON Anza 17x8.5 6x5.5 25mm Offset 5.75in BS 95.1mm Hub Bore Satin Black Wheel and you're serious about performance, you already know that factory suspension was engineered to a price point, not a performance target. ICON Vehicle Dynamics takes a completely different approach.
ICON Vehicle Dynamics engineers every component to perform under the most punishing real-world conditions. Founded by racers and built for serious off-road enthusiasts, ICON has earned its reputation by winning on the roughest terrain on earth — from the brutal desert floors of the Baja 1000 to high-speed Nevada dry lake beds. ICON's engineering team obsesses over damping curves, valving specifications, and chassis geometry so your truck or SUV responds exactly the way you want it to, whether you're hammering through rock gardens at low speed or floating across whoops at triple-digit velocities.
The result is this suspension — engineered with the ICON Anza 17x8.5 6x5.5 25mm Offset 5.75in BS 95.1mm Hub Bore Satin Black Wheel specifically in mind, matching spring rates, mounting geometry, and component sizing to what this platform actually demands under real-world conditions.
## Engineering and Technology
ICON's proprietary triple-rate springs work in concert with their precisely valved monotube shocks to deliver a progressive ride that stays composed whether you're empty or loaded. The external reservoir design allows significantly more oil volume than standard coilover configurations, which directly translates to fade resistance during extended high-heat cycles. Aluminum construction throughout keeps unsprung weight low — critical for maintaining tire contact across broken terrain.
For the ICON Anza 17x8.5 6x5.5 25mm Offset 5.75in BS 95.1mm Hub Bore Satin Black Wheel, these engineering principles translate into direct performance improvements. owners running this suspension consistently report improved body control at highway speeds, better composure over rough terrain, and reduced bottoming under hard cornering loads.
## Who This Is For
This ICON suspension is designed for ICON Anza 17x8.5 6x5.5 25mm Offset 5.75in BS 95.1mm Hub Bore Satin Black Wheel owners who use their vehicles seriously. Whether your primary use is daily driving, overlanding, trail riding, this component was engineered to deliver in your specific application.
Off-road capability starts with suspension. The factory suspension suspension was designed for the average buyer driving average roads — not for the owner who's running loaded to GVW on unimproved forest roads, or who's navigating technical rock terrain where a moment of imprecise suspension response can damage the vehicle or trap it on an obstacle. This suspension closes the gap between what the factory provides and what serious use actually demands.
Ideal for: Daily driving · Overlanding · Trail riding · Desert running · Rock crawling
## Why Upgrade Matters for ICON Anza 17x8.5 6x5.5 25mm Offset 5.75in BS 95.1mm Hub Bore Satin Black Wheel
Factory suspension components are engineered to a budget and a set of average expectations. The engineering team responsible for the factory spec had to balance cost, mass-market appeal, regulatory compliance, and warranty exposure — none of which prioritize the kind of performance a serious truck or SUV owner actually needs.
When you're towing at or near GVW, loaded with gear, or navigating trails where terrain changes second-to-second, the factory suspension is already working at the edge of its design envelope. A properly engineered suspension from ICON gives you headroom — compression and rebound control that doesn't fade under heat, spring rates that maintain geometry under real load, and construction that lasts through conditions the factory spec was never designed to handle.
## Installation and Compatibility
This ICON suspension is designed to fit the ICON Anza 17x8.5 6x5.5 25mm Offset 5.75in BS 95.1mm Hub Bore Satin Black Wheel using the factory mounting points. No cutting, welding, or frame modification is required. Hardware is included, and installation follows the factory service manual torque specifications. Most installations can be completed with a floor jack, jack stands, and standard hand tools.
This product is designed and tested specifically for the ICON Anza 17x8.5 6x5.5 25mm Offset 5.75in BS 95.1mm Hub Bore Satin Black Wheel. If your vehicle has factory performance packages that may affect fitment, verify compatibility using your vehicle's build sheet or contact technical support before ordering.
## Complete Your Build with Bull Strap
If you're upgrading your your vehicle's suspension system, your suspension travel and drivetrain protection deserve the same attention. Bull Strap limit straps are the final piece of the suspension puzzle — engineered and manufactured in the USA to control maximum droop travel and protect your axles, CV joints, and brake lines from overextension under articulation.
Bull Strap limit straps are made in the USA from high-tenacity webbing and proprietary hardware and are the choice of professional fabricators and serious off-road builders who understand that uncontrolled droop is how you destroy expensive components. Pair them with your ICON suspension upgrade for a complete, properly engineered suspension system.
## Frequently Asked Questions
**Will this ICON suspension fit my ICON Anza 17x8.5 6x5.5 25mm Offset 5.75in BS 95.1mm Hub Bore Satin Black Wheel?**
Yes — this product is designed and validated for the ICON Anza 17x8.5 6x5.5 25mm Offset 5.75in BS 95.1mm Hub Bore Satin Black Wheel. Fitment data is verified against factory specifications. If you have a vehicle with unusual factory options or prior modifications, verify those don't affect the installation before ordering.
**How does ICON's suspension compare to the factory OEM equivalent?**
The factory suspension was designed to a budget and an average use case. ICON's engineering prioritizes performance, durability, and real-world function over cost minimization. In practical terms, you'll notice the difference in body control, ride quality, and the ability to maintain traction across varied terrain without the compromise the factory system requires.
**Is this suspension covered by a warranty?**
ICON stands behind the quality of their products with manufacturer warranty coverage. Specific warranty terms vary by product line — refer to the product documentation or contact ICON directly for warranty details applicable to this part. ICON's warranty reflects their confidence in the quality of their manufacturing and materials.
**Can I install this suspension myself, or do I need a professional?**
Installation difficulty varies by suspension and vehicle. Suspension work requires vehicle-specific knowledge and access to appropriate lifting and support equipment. If you're comfortable with suspension disassembly and have a proper lift or quality jack stands, most ICON suspension components can be installed at home. Wheel alignment should always be checked and corrected after any suspension modification.
## Build Quality and Value
ICON products are not the cheapest option for your ICON Anza 17x8.5 6x5.5 25mm Offset 5.75in BS 95.1mm Hub Bore Satin Black Wheel. They are not designed to be. Budget components in critical systems — suspension components that your vehicle's capability and, in some cases, safety depend on — create a false economy. The cost of a component failure in a critical system far exceeds the delta between a quality product and a cut-rate alternative. ICON prices reflect genuine engineering investment, quality materials, precise manufacturing, and the validation process that ensures the product performs exactly as specified across its full service life.
For ICON Anza 17x8.5 6x5.5 25mm Offset 5.75in BS 95.1mm Hub Bore Satin Black Wheel owners who depend on their vehicles in demanding conditions, the calculation is straightforward: invest in components that perform when you need them to, last as long as the vehicle, and back that promise with manufacturer warranty coverage. This ICON suspension meets that standard.
For professional builders, fleet managers, and serious enthusiasts who track performance across their builds, ICON's consistent engineering standards mean predictable outcomes. When you specify ICON for a your vehicle build, you know what you're getting.
## Real-World Performance Context
ICON products are validated in the real world, not just on engineering benches. The suspension hardware you choose for your ICON Anza 17x8.5 6x5.5 25mm Offset 5.75in BS 95.1mm Hub Bore Satin Black Wheel will be asked to perform across a wide range of conditions — temperature extremes, sustained load cycles, rough terrain, and the cumulative stress of thousands of miles in demanding environments. This suspension is engineered to deliver consistent, repeatable performance across all of those conditions.
For ICON Anza 17x8.5 6x5.5 25mm Offset 5.75in BS 95.1mm Hub Bore Satin Black Wheel owners who tow regularly, suspension performance under load is particularly important. An unloaded truck and a fully loaded truck have very different dynamic characteristics, and the suspension component that handles one well doesn't necessarily handle the other without compromise. ICON's engineering for this platform accounts for that real-world load variation, with spring rates and damping curves that perform across the full range of loading conditions you're actually likely to encounter.
**What makes the ICON Anza 17x8.5 6x5.5 25mm Offset 5.75in BS 95.1mm Hub Bore Satin Black Wheel a good platform for suspension upgrades?**
The ICON Anza 17x8.5 6x5.5 25mm Offset 5.75in BS 95.1mm Hub Bore Satin Black Wheel has an excellent foundation — the platform features robust frame construction, capable stock drivetrain components, and factory suspension specs that are genuinely competent for average use. The reason aftermarket upgrades make such a difference is precisely because the factory engineers did their job well — the platform can handle more than the factory spec delivers. A ICON suspension lets you access that latent capability.
**How long does this suspension last?**
ICON components are designed for service lives that match or exceed the factory equivalent. Proper installation, periodic inspection, and maintenance appropriate to your usage intensity are the primary variables in longevity. Owners running their ICON Anza 17x8.5 6x5.5 25mm Offset 5.75in BS 95.1mm Hub Bore Satin Black Wheel primarily on-road under moderate loads can expect many years of service without attention. Owners running aggressive off-road applications should inspect suspension components more frequently and follow the manufacturer's maintenance recommendations.
**Will this affect my ICON Anza 17x8.5 6x5.5 25mm Offset 5.75in BS 95.1mm Hub Bore Satin Black Wheel factory warranty?**
Under the Magnuson-Moss Warranty Act, a manufacturer cannot void your vehicle warranty simply because you installed aftermarket components, unless they can demonstrate the aftermarket part caused the specific failure. That said, review your warranty terms and understand the interaction between your aftermarket components and any open factory warranty claims before installation.
Details
Staying true to the ICON Alloys approach, the Anza has been engineered to maximize caliper clearance and optimize wheel position for un-hindered suspension travel and steering function. Backspace dimensions and wheel offset have been strategically developed to reduce scrub radius, improving all-around handling and ride quality and making a set of these wheels the perfect complement to an ICON Vehicle Dynamics suspension system.
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | Bronco | Badlands |
| 2021-2023,2025-2026 | Ford | Bronco | Base |
| 2021-2026 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2021-2026 | Ford | Bronco | Outer Banks |
| 2019-2023 | Ford | Ranger | Lariat |
| 2019-2023 | Ford | Ranger | XL |
| 2019-2023 | Ford | Ranger | XLT |
| 2024-2026 | Lexus | GX550 | Luxury |
| 2024-2026 | Lexus | GX550 | Luxury+ |
| 2024-2026 | Lexus | GX550 | Overtrail |
| 2024-2026 | Lexus | GX550 | Overtrail+ |
| 2024-2026 | Lexus | GX550 | Premium |
| 2024-2026 | Lexus | GX550 | Premium+ |
| 2022-2024 | Lexus | LX600 | Base |
| 2022 | Lexus | LX600 | F Sport |
| 2023-2025 | Lexus | LX600 | F Sport Handling |
| 2022-2025 | Lexus | LX600 | Luxury |
| 2022-2025 | Lexus | LX600 | Premium |
| 2022-2024 | Lexus | LX600 | Ultra Luxury |
| 2025-2026 | Toyota | 4Runner | Limited |
| 2025-2026 | Toyota | 4Runner | Platinum |
| 2025-2026 | Toyota | 4Runner | SR5 |
| 2025-2026 | Toyota | 4Runner | Trailhunter |
| 2025-2026 | Toyota | 4Runner | TRD Off-Road |
| 2025-2026 | Toyota | 4Runner | TRD Off-Road Premium |
| 2025-2026 | Toyota | 4Runner | TRD Pro |
| 2025-2026 | Toyota | 4Runner | TRD Sport |
| 2025-2026 | Toyota | 4Runner | TRD Sport Premium |
| 2024-2026 | Toyota | Land Cruiser | 1958 |
| 2024-2026 | Toyota | Land Cruiser | Base |
| 2024 | Toyota | Land Cruiser | First Edition |
| 2025-2026 | Toyota | Sequoia | 1794 Edition |
| 2023-2026 | Toyota | Sequoia | Capstone |
| 2023-2026 | Toyota | Sequoia | Limited |
| 2023-2026 | Toyota | Sequoia | Platinum |
| 2023-2026 | Toyota | Sequoia | SR5 |
| 2023-2026 | Toyota | Sequoia | TRD Pro |
| 2024-2026 | Toyota | Tacoma | Limited |
| 2024-2026 | Toyota | Tacoma | SR |
| 2024-2026 | Toyota | Tacoma | SR5 |
| 2024-2026 | Toyota | Tacoma | Trailhunter |
| 2024-2026 | Toyota | Tacoma | TRD Off-Road |
| 2024-2026 | Toyota | Tacoma | TRD PreRunner |
| 2024-2026 | Toyota | Tacoma | TRD Pro |
| 2024-2026 | Toyota | Tacoma | TRD Sport |
| 2022-2025 | Toyota | Tundra | 1794 Edition |
| 2022-2025 | Toyota | Tundra | Capstone |
| 2022-2025 | Toyota | Tundra | Limited |
| 2022-2025 | Toyota | Tundra | Platinum |
| 2022-2025 | Toyota | Tundra | SR |
| 2022-2025 | Toyota | Tundra | SR5 |
| 2022-2025 | Toyota | Tundra | TRD Pro |
Refund Policy
Bull Strap products are the highest grade cut and sewn items in the automotive industry. We are proud to support USA workers in our bid to manufacture right here in the United States.
WARRANTY
Bull Strap guarantees all products to be free from manufacturer defects for all items for one year, and any color fading (where mentioned) for 2 years from the time of purchase. In the event of a product failure, Bull Strap will decide whether that product should be repaired or replaced after reviewing photos submitted by the customer. Bull Strap will then provide a return shipping label for any product in which the material or stitching were determined to be the root cause. Once received, the product will be repaired or replaced and returned to the customer at no cost.
REFUND POLICY
Seat covers and other custom made items, retain all warranties listed above, but cannot be refunded or exchanged at any time
On non-custom items, if within 30 days of purchase directly from Bull Strap, a customer would like to return an unused product with no modifications, and where the item(s) can be considered 'new in box', the customer can email us at info@bullstrap.com or call us at 951-319-4008. The will be a 15% restocking fee subtracted from any returned items. Once processed, the customer must ship the product back and submit the tracking information. Bull Strap will issue a full refund minus the 15% restocking fee once the item(s) is/are received and determined to be in 'Brand New' condition. NOTE: If a customer ordered Bull Strap products from a dealer, the customer must go through this process directly with the dealer the product was ordered from.
As always, we strive to provide the best product and customer service available...but we are definitely not perfect. If at any time, you have any issues, please contact us, so we can address any problems you may have. Thanks!
Shipping Policy
Coming Soon