EBC Racing 07-13 BMW M3 (E90/E92/E93) 4.0L Front Titanium Shim - product view

EBC Racing 07-13 BMW M3 (E90/E92/E93) 4.0L Front Titanium Shim

$126.83
In Stock Pre order Out of stock
Add to Wishlist
Details
Shims must be flat and sit without any gapping on the rear of the brake pad. If your pad set is supplied with any other shims such as the rubberised shims on most stock pads, these Must be removed before fitting titanium shims to avoid a pad over-thickness situation. Simply prize the old shims off to break the adhesive seal with a blunt edge screwdriver or similar, and once removed lightly, sand the rear of the pad to remove any excess glue or surface irregularities. The new titanium shims Must be snugged up against the pad backing plate without any debris between to avoid long pedal/brake sponge. Titanium shim sets for sliding calipers contain only two shims and these must each be applied to the pad located next to the piston. Titanium shims for multi-piston calipers are supplied for all four pads in the axle set.

This Part Fits:

Year Make Model Submodel
2011 BMW 1 Series M Base
2011-2013 BMW 128i Base
2011-2013 BMW 135i Base
2013 BMW 135is Base
2006-2007 BMW 525i Base
2007 BMW 525xi Base
2008-2010 BMW 528i Base
2009-2010 BMW 528i xDrive Base
2008 BMW 528xi Base
2004-2007 BMW 530i Base
2006-2007 BMW 530xi Base
2008-2010 BMW 535i Base
2008 BMW 535xi Base
2004-2005 BMW 545i Base
2006-2010 BMW 550i Base
2004-2005 BMW 645Ci Base
2006-2010 BMW 650i Base
2002-2005 BMW 745i Base
2002-2005 BMW 745Li Base
2006-2008 BMW 750i Base
2006-2008 BMW 750Li Base
2004-2006 BMW 760i Base
2003-2008 BMW 760Li Base
2008-2013 BMW M3 Base
Refund Policy

Bull Strap products are the highest grade cut and sewn items in the automotive industry. We are proud to support USA workers in our bid to manufacture right here in the United States.

WARRANTY

Bull Strap guarantees all products to be free from manufacturer defects for all items for one year, and any color fading (where mentioned) for 2 years from the time of purchase. In the event of a product failure, Bull Strap will decide whether that product should be repaired or replaced after reviewing photos submitted by the customer. Bull Strap will then provide a return shipping label for any product in which the material or stitching were determined to be the root cause. Once received, the product will be repaired or replaced and returned to the customer at no cost.

REFUND POLICY

Seat covers and other custom made items, retain all warranties listed above, but cannot be refunded or exchanged at any time

On non-custom items, if within 30 days of purchase directly from Bull Strap, a customer would like to return an unused product with no modifications, and where the item(s) can be considered 'new in box', the customer can email us at info@bullstrap.com or call us at 951-319-4008. The will be a 15% restocking fee subtracted from any returned items. Once processed, the customer must ship the product back and submit the tracking information. Bull Strap will issue a full refund minus the 15% restocking fee once the item(s) is/are received and determined to be in 'Brand New' condition. NOTE: If a customer ordered Bull Strap products from a dealer, the customer must go through this process directly with the dealer the product was ordered from.

As always, we strive to provide the best product and customer service available...but we are definitely not perfect. If at any time, you have any issues, please contact us, so we can address any problems you may have. Thanks!

Shipping Policy

Coming Soon

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)