Photo - Primary
Photo - Primary
Photo - Primary
User 4
Photo - Unmounted
Photo - Unmounted
Photo - Unmounted
Photo - Unmounted
Photo - Unmounted

DEI Fire Sleeve and Tape Kit 3/4in I.D. x 3ft

$53.99
In Stock Pre order Out of stock
Add to Wishlist
Details
Fire Sleeve solves the problem of heat and abrasions damaging fuel, transmission and brake lines and is a fireproof solution. Constructed from a high temperature resistant braided glass material, woven into a sleeve and heavily coated with 100% iron oxide silicone rubber, Fire Sleeve thermal insulator sleeve provides the ultimate in heat insulation and protection from direct heat up to 500°F. Includes a 16-inch length of black Fire Tape, an adhesive-free, self-adhering tape, to finish off ends of Fire Sleeve or when joining two Fire Sleeves together while presenting a clean and professional look. Insulates wiring, hoses, oil / brakes / transmission lines & more Use for bundling & protecting hoses, electrical wiring, etc. Withstands 2000°F of intermittent heat Includes 16 inches of black Fire Tape Size: 0.75 (3/4) inch x 36 inches Fitment Chart AN Conversion Chart AN Size Metal Tube O.D. Thread Size 2 1/8 in. 5/16 24 SAE 3 3/16 in. 3/8 24 SAE 4 1/4 in. 7/16 20 SAE 5 5/16 in. 3/8 18 SAE 6 3/8 in. 9/16 18 SAE 8 1/2 in. 3/4 16 SAE 10 5/8 in. 7/8 14 SAE 12 3/4 in. 1-1/16 12 SAE 16 1 in. 1-5/16 12 SAE 20 1-1/4 in. 1-5/8 12 SAE 24 1-1/2 in. 1-7/8 12 SAE 28 1-3/4 in. 2-1/4 12 SAE 32 2 in. 2-1/2 12 SAE Fire Sleeve Application Chart Part# Name Line Size* 10470 3/8 in. Fire Sleeve 3AN4AN6AN** 10472 5/8 in. Fire Sleeve 6AN8AN 10474 1 in. Fire Sleeve 10AN12AN16AN**5/8 in. Heater Hose3/4 in. Heater Hose *Braided Kevlar line was used in testing. You may notice a slight difference in size if you have Braided Stainless Steel lines. **Tight fit: If you have fittings on your line, you may need to order one size up. You can achieve between 1/16 in. and 1/8 in. stretch out of our material. This may help on installs with fittings already on the lines.
Installation Instructions
Refund Policy

Bull Strap products are the highest grade cut and sewn items in the automotive industry. We are proud to support USA workers in our bid to manufacture right here in the United States.

WARRANTY

Bull Strap guarantees all products to be free from manufacturer defects for all items for one year, and any color fading (where mentioned) for 2 years from the time of purchase. In the event of a product failure, Bull Strap will decide whether that product should be repaired or replaced after reviewing photos submitted by the customer. Bull Strap will then provide a return shipping label for any product in which the material or stitching were determined to be the root cause. Once received, the product will be repaired or replaced and returned to the customer at no cost.

REFUND POLICY

Seat covers and other custom made items, retain all warranties listed above, but cannot be refunded or exchanged at any time

On non-custom items, if within 30 days of purchase directly from Bull Strap, a customer would like to return an unused product with no modifications, and where the item(s) can be considered 'new in box', the customer can email us at info@bullstrap.com or call us at 951-319-4008. The will be a 15% restocking fee subtracted from any returned items. Once processed, the customer must ship the product back and submit the tracking information. Bull Strap will issue a full refund minus the 15% restocking fee once the item(s) is/are received and determined to be in 'Brand New' condition. NOTE: If a customer ordered Bull Strap products from a dealer, the customer must go through this process directly with the dealer the product was ordered from.

As always, we strive to provide the best product and customer service available...but we are definitely not perfect. If at any time, you have any issues, please contact us, so we can address any problems you may have. Thanks!

Shipping Policy

Coming Soon