Camburg Toyota Tacoma Pre 4WD 96-04 / 4-Runner 96-02 1in Performance Uniball Upper Arms - Bull Strap
Camburg Toyota Tacoma Pre 4WD 96-04 / 4-Runner 96-02 1in Performance Uniball Upper Arms - Bull Strap
Camburg Toyota Tacoma Pre 4WD 96-04 / 4-Runner 96-02 1in Performance Uniball Upper Arms - Bull Strap
Camburg Toyota Tacoma Pre 4WD 96-04 / 4-Runner 96-02 1in Performance Uniball Upper Arms - Bull Strap
Camburg Toyota Tacoma Pre 4WD 96-04 / 4-Runner 96-02 1in Performance Uniball Upper Arms - Bull Strap
Camburg Toyota Tacoma Pre 4WD 96-04 / 4-Runner 96-02 1in Performance Uniball Upper Arms - Bull Strap
Camburg Toyota Tacoma Pre 4WD 96-04 / 4-Runner 96-02 1in Performance Uniball Upper Arms - Bull Strap
Camburg Toyota Tacoma Pre 4WD 96-04 / 4-Runner 96-02 1in Performance Uniball Upper Arms - Bull Strap
Camburg Toyota Tacoma Pre 4WD 96-04 / 4-Runner 96-02 1in Performance Uniball Upper Arms - Bull Strap

Camburg Toyota Tacoma Pre 4WD 96-04 / 4-Runner 96-02 1in Performance Uniball Upper Arms

$1,335.70 $950.17 SAVE 29%
In Stock Pre order Out of stock
Add to Wishlist
Details
When lifting your truck, the stock upper arms become the limiting factor and hold back your suspensions performance. Our Camburg upper arms address these issues and more.  Replacing the stock ball-joint  with a larger 1.00 uni-ball bearing we’re able to gain wheel travel with a part that is considerably stronger and will last longer under extreme conditions. We build more caster and change the camber curve to correct geometry so the vehicle aligns correctly and improves driving characteristics and handling. Using the latest CAD/CAM engineering software we design these arms to the strictest standards using our FARO laser scan arm to model the OEM parts and frames. Manufactured in-house, we have the tubes CNC laser cut and bent, then are MIG welded in precision fixtures before sending out to be sandblasted and powder-coated. Our in-house CNC machine shop makes all the machined parts including the uniball mis-alignment spacers from heat-treated stainless steel. We pride ourselves in producing the best parts available under our own roof and control. Increases usable wheel travel Corrects camber and caster Eliminates weak factory ball-joints Thicker.156" wall round tubing Laser cut and CNC bent tubes MIG welded CAD/CAM engineered Polyurethane frame pivot bushings with grease-able zerk fittings FK 1.00" PTFE-lined uniballs pre-installed Steel gray powder-coating All necessary hardware included and ready to install Made in the USA Designed for 1-3" of lift Increases usable wheel travel Corrects camber and caster Eliminates weak factory ball-joints 1.00" FK uniballs.
Installation Instructions


This Part Fits:

Year Make Model Submodel
1996-2001 Toyota 4Runner Base
1996-2002 Toyota 4Runner Limited
1996-2002 Toyota 4Runner SR5
1996-2004 Toyota Tacoma Base
1998 Toyota Tacoma DLX
1998-2000 Toyota Tacoma Limited
1998-2004 Toyota Tacoma Pre Runner
1996-2000 Toyota Tacoma SR5
Refund Policy

Bull Strap products are the highest grade cut and sewn items in the automotive industry. We are proud to support USA workers in our bid to manufacture right here in the United States.

WARRANTY

Bull Strap guarantees all products to be free from manufacturer defects for all items for one year, and any color fading (where mentioned) for 2 years from the time of purchase. In the event of a product failure, Bull Strap will decide whether that product should be repaired or replaced after reviewing photos submitted by the customer. Bull Strap will then provide a return shipping label for any product in which the material or stitching were determined to be the root cause. Once received, the product will be repaired or replaced and returned to the customer at no cost.

REFUND POLICY

Seat covers and other custom made items, retain all warranties listed above, but cannot be refunded or exchanged at any time

On non-custom items, if within 30 days of purchase directly from Bull Strap, a customer would like to return an unused product with no modifications, and where the item(s) can be considered 'new in box', the customer can email us at info@bullstrap.com or call us at 951-319-4008. The will be a 15% restocking fee subtracted from any returned items. Once processed, the customer must ship the product back and submit the tracking information. Bull Strap will issue a full refund minus the 15% restocking fee once the item(s) is/are received and determined to be in 'Brand New' condition. NOTE: If a customer ordered Bull Strap products from a dealer, the customer must go through this process directly with the dealer the product was ordered from.

As always, we strive to provide the best product and customer service available...but we are definitely not perfect. If at any time, you have any issues, please contact us, so we can address any problems you may have. Thanks!

Shipping Policy

Coming Soon