## Borla 2024 Acura Integra Type S ATAK Cat-Back Exhaust System - Coated Black
If you're driving a Borla 2024 Acura Integra Type S ATAK Cat-Back Exhaust System - Coated Black and you're serious about performance, you already know that factory cat-back exhaust system was engineered to a price point, not a performance target. Borla takes a completely different approach.
Borla Performance Industries has been engineering exhaust systems from their Oxnard, California facility since 1978, and over four decades they've built their reputation on one fundamental principle: sound quality matters as much as performance numbers. Borla's signature exhaust note — aggressive under hard acceleration, civilized at cruise — comes from their proprietary straight-through technology combined with internal baffling that manages tone across the full RPM range. Borla systems are manufactured from aircraft-quality T-304 stainless steel and backed by a million-mile warranty.
The result is this cat-back exhaust system — engineered with the Borla 2024 Acura Integra Type S ATAK Cat-Back Exhaust System - Coated Black specifically in mind, matching spring rates, mounting geometry, and component sizing to what this platform actually demands under real-world conditions.
## Engineering and Technology
Borla's patented straight-through technology eliminates the performance-robbing backpressure of conventional muffler designs while using internal baffling chambers to tune sound frequencies. The result is measurably less restriction than factory systems, which translates directly to horsepower and torque gains across the RPM band. Borla's T-304 stainless construction resists corrosion from road salt and moisture far beyond what mild steel or aluminized systems can achieve — which is why they can offer a lifetime warranty on their materials and construction.
For the Borla 2024 Acura Integra Type S ATAK Cat-Back Exhaust System - Coated Black, these engineering principles translate into direct performance improvements. owners running this cat-back exhaust system consistently report improved throttle response, noticeable low-end torque gains, and the kind of exhaust note that actually improves the driving experience rather than just being louder.
## Who This Is For
This Borla cat-back exhaust system is designed for Borla 2024 Acura Integra Type S ATAK Cat-Back Exhaust System - Coated Black owners who use their vehicles seriously. Whether your primary use is performance driving, daily driving, towing, this component was engineered to deliver in your specific application.
Factory exhaust systems are engineered for emissions compliance and cost reduction, not for extracting maximum performance from your engine. The factory exhaust exhaust leaves measurable horsepower and torque on the table, and does it with a muted, compressed exhaust note that doesn't do justice to what's actually happening under the hood. This Borla system corrects both issues.
Ideal for: Performance driving · Daily driving · Towing · Truck builds
## Why Upgrading Matters
Factory exhaust components are engineered to a budget and a set of average expectations. The engineering team responsible for the factory spec had to balance cost, mass-market appeal, regulatory compliance, and warranty exposure — none of which prioritize the kind of performance a serious truck or SUV owner actually needs.
The factory exhaust exhaust system uses a muffler design optimized for quiet operation and regulatory compliance, not for extracting performance. The result is measurable backpressure at wide-open throttle — backpressure that directly costs you horsepower and torque. A Borla cat-back exhaust system removes that restriction while engineering the exhaust tone for quality and character, not just volume.
## Installation and Compatibility
This Borla cat-back exhaust system is designed to fit the Borla 2024 Acura Integra Type S ATAK Cat-Back Exhaust System - Coated Black using factory mounting positions and existing hangers. No cutting or welding is required on most configurations. Hardware is included, and all systems are designed to work with factory catalytic converters to maintain emissions compliance.
This product is designed and tested specifically for the Borla 2024 Acura Integra Type S ATAK Cat-Back Exhaust System - Coated Black. If your vehicle has factory performance packages that may affect fitment, verify compatibility before ordering.
## Complete Your Build with Bull Strap
If you're upgrading your your vehicle's exhaust system, your suspension travel and drivetrain protection deserve the same attention. Bull Strap limit straps are the final piece of the suspension puzzle — engineered and manufactured in the USA to control maximum droop travel and protect your axles, CV joints, and brake lines from overextension under articulation.
Bull Strap limit straps are made in the USA from high-tenacity webbing and proprietary hardware and are the choice of professional fabricators and serious off-road builders who understand that uncontrolled droop is how you destroy expensive components. Pair them with your Borla exhaust upgrade for a complete, properly engineered suspension system.
## Frequently Asked Questions
**Will this Borla cat-back exhaust system fit my Borla 2024 Acura Integra Type S ATAK Cat-Back Exhaust System - Coated Black?**
Yes — this product is designed and validated for the Borla 2024 Acura Integra Type S ATAK Cat-Back Exhaust System - Coated Black. Fitment data is verified against factory specifications. If you have a vehicle with unusual factory options or prior modifications, verify those don't affect installation before ordering.
**How does Borla's cat-back exhaust system compare to the factory equivalent?**
The factory cat-back exhaust system was designed to a budget and an average use case. Borla's engineering prioritizes performance, durability, and real-world function over cost minimization. In practical terms, you'll notice the difference in throttle response, power delivery under load, and the quality of the exhaust tone across the RPM range.
**Is this cat-back exhaust system covered by a warranty?**
Borla stands behind the quality of their products with manufacturer warranty coverage. Borla is known for their million-mile warranty on T-304 stainless systems.
**Can I install this cat-back exhaust system myself?**
Installation difficulty varies by product. Exhaust installations are typically straightforward for experienced home mechanics with access to a lift or proper under-vehicle clearance.
## Real-World Performance
Borla products are validated in the real world, not just on engineering benches. The exhaust hardware you choose for your Borla 2024 Acura Integra Type S ATAK Cat-Back Exhaust System - Coated Black will be asked to perform across a wide range of conditions — temperature extremes, sustained load cycles, rough terrain, and the cumulative stress of thousands of miles in demanding environments. This cat-back exhaust system is engineered to deliver consistent, repeatable performance across all of those conditions.
Exhaust systems face high temperatures from sustained high-RPM operation, road salt and moisture exposure, vibration from drivetrain harmonics, and thermal cycling between hot and cold. Borla's construction standards and materials are chosen specifically to handle these conditions for the long term.
## Build Quality and Value
Borla products are not the cheapest option for your Borla 2024 Acura Integra Type S ATAK Cat-Back Exhaust System - Coated Black. They are not designed to be. Budget components in critical systems create a false economy — the cost of a component failure in a critical system far exceeds the delta between a quality product and a cut-rate alternative. Borla prices reflect genuine engineering investment, quality materials, precise manufacturing, and the validation process that ensures the product performs exactly as specified across its full service life.
For Borla 2024 Acura Integra Type S ATAK Cat-Back Exhaust System - Coated Black owners who depend on their vehicles in demanding conditions, the calculation is straightforward: invest in components that perform when you need them to, last as long as the vehicle, and back that promise with manufacturer warranty coverage.
**What makes the Borla 2024 Acura Integra Type S ATAK Cat-Back Exhaust System - Coated Black a strong platform for exhaust upgrades?**
The Borla 2024 Acura Integra Type S ATAK Cat-Back Exhaust System - Coated Black has an excellent foundation — the platform features robust frame construction, capable stock drivetrain components, and factory exhaust specs that are genuinely competent for average use. The reason aftermarket upgrades make such a difference is precisely because the factory engineers did their job well — the platform can handle more than the factory spec delivers. A Borla cat-back exhaust system lets you access that latent capability.
**Magnuson-Moss Warranty Act:** Under federal law, a manufacturer cannot void your vehicle warranty simply because you installed aftermarket components, unless they can demonstrate the aftermarket part caused the specific failure. Review your warranty terms before installation.
**What makes the Borla 2024 Acura Integra Type S ATAK Cat-Back Exhaust System - Coated Black a strong platform for exhaust upgrades?**
The Borla 2024 Acura Integra Type S ATAK Cat-Back Exhaust System - Coated Black has an excellent foundation — the platform features robust frame construction, capable stock drivetrain components, and factory exhaust specs that are genuinely competent for average use. The reason aftermarket upgrades make such a difference is precisely because the factory engineers did their job well — the platform can handle more than the factory spec delivers. A Borla cat-back exhaust system lets you access that latent capability.
**How long does a Borla cat-back exhaust system last?**
Borla components are designed for service lives that match or exceed the factory equivalent. Proper installation, periodic inspection, and maintenance appropriate to your usage intensity are the primary variables in longevity. Owners running their Borla 2024 Acura Integra Type S ATAK Cat-Back Exhaust System - Coated Black primarily on-road under moderate loads can expect many years of service without attention beyond normal inspection intervals. Owners running aggressive off-road applications should inspect exhaust components more frequently and follow the manufacturer's maintenance recommendations for their usage profile.
**Under the Magnuson-Moss Warranty Act**, a manufacturer cannot void your vehicle warranty simply because you installed aftermarket components, unless they can demonstrate the aftermarket part caused the specific failure. Review your warranty terms before installation and keep records of the parts installed and dates of installation.
If you're driving a Borla 2024 Acura Integra Type S ATAK Cat-Back Exhaust System - Coated Black and you're serious about performance, you already know that factory cat-back exhaust system was engineered to a price point, not a performance target. Borla takes a completely different approach.
Borla Performance Industries has been engineering exhaust systems from their Oxnard, California facility since 1978, and over four decades they've built their reputation on one fundamental principle: sound quality matters as much as performance numbers. Borla's signature exhaust note — aggressive under hard acceleration, civilized at cruise — comes from their proprietary straight-through technology combined with internal baffling that manages tone across the full RPM range. Borla systems are manufactured from aircraft-quality T-304 stainless steel and backed by a million-mile warranty.
The result is this cat-back exhaust system — engineered with the Borla 2024 Acura Integra Type S ATAK Cat-Back Exhaust System - Coated Black specifically in mind, matching spring rates, mounting geometry, and component sizing to what this platform actually demands under real-world conditions.
## Engineering and Technology
Borla's patented straight-through technology eliminates the performance-robbing backpressure of conventional muffler designs while using internal baffling chambers to tune sound frequencies. The result is measurably less restriction than factory systems, which translates directly to horsepower and torque gains across the RPM band. Borla's T-304 stainless construction resists corrosion from road salt and moisture far beyond what mild steel or aluminized systems can achieve — which is why they can offer a lifetime warranty on their materials and construction.
For the Borla 2024 Acura Integra Type S ATAK Cat-Back Exhaust System - Coated Black, these engineering principles translate into direct performance improvements. owners running this cat-back exhaust system consistently report improved throttle response, noticeable low-end torque gains, and the kind of exhaust note that actually improves the driving experience rather than just being louder.
## Who This Is For
This Borla cat-back exhaust system is designed for Borla 2024 Acura Integra Type S ATAK Cat-Back Exhaust System - Coated Black owners who use their vehicles seriously. Whether your primary use is performance driving, daily driving, towing, this component was engineered to deliver in your specific application.
Factory exhaust systems are engineered for emissions compliance and cost reduction, not for extracting maximum performance from your engine. The factory exhaust exhaust leaves measurable horsepower and torque on the table, and does it with a muted, compressed exhaust note that doesn't do justice to what's actually happening under the hood. This Borla system corrects both issues.
Ideal for: Performance driving · Daily driving · Towing · Truck builds
## Why Upgrading Matters
Factory exhaust components are engineered to a budget and a set of average expectations. The engineering team responsible for the factory spec had to balance cost, mass-market appeal, regulatory compliance, and warranty exposure — none of which prioritize the kind of performance a serious truck or SUV owner actually needs.
The factory exhaust exhaust system uses a muffler design optimized for quiet operation and regulatory compliance, not for extracting performance. The result is measurable backpressure at wide-open throttle — backpressure that directly costs you horsepower and torque. A Borla cat-back exhaust system removes that restriction while engineering the exhaust tone for quality and character, not just volume.
## Installation and Compatibility
This Borla cat-back exhaust system is designed to fit the Borla 2024 Acura Integra Type S ATAK Cat-Back Exhaust System - Coated Black using factory mounting positions and existing hangers. No cutting or welding is required on most configurations. Hardware is included, and all systems are designed to work with factory catalytic converters to maintain emissions compliance.
This product is designed and tested specifically for the Borla 2024 Acura Integra Type S ATAK Cat-Back Exhaust System - Coated Black. If your vehicle has factory performance packages that may affect fitment, verify compatibility before ordering.
## Complete Your Build with Bull Strap
If you're upgrading your your vehicle's exhaust system, your suspension travel and drivetrain protection deserve the same attention. Bull Strap limit straps are the final piece of the suspension puzzle — engineered and manufactured in the USA to control maximum droop travel and protect your axles, CV joints, and brake lines from overextension under articulation.
Bull Strap limit straps are made in the USA from high-tenacity webbing and proprietary hardware and are the choice of professional fabricators and serious off-road builders who understand that uncontrolled droop is how you destroy expensive components. Pair them with your Borla exhaust upgrade for a complete, properly engineered suspension system.
## Frequently Asked Questions
**Will this Borla cat-back exhaust system fit my Borla 2024 Acura Integra Type S ATAK Cat-Back Exhaust System - Coated Black?**
Yes — this product is designed and validated for the Borla 2024 Acura Integra Type S ATAK Cat-Back Exhaust System - Coated Black. Fitment data is verified against factory specifications. If you have a vehicle with unusual factory options or prior modifications, verify those don't affect installation before ordering.
**How does Borla's cat-back exhaust system compare to the factory equivalent?**
The factory cat-back exhaust system was designed to a budget and an average use case. Borla's engineering prioritizes performance, durability, and real-world function over cost minimization. In practical terms, you'll notice the difference in throttle response, power delivery under load, and the quality of the exhaust tone across the RPM range.
**Is this cat-back exhaust system covered by a warranty?**
Borla stands behind the quality of their products with manufacturer warranty coverage. Borla is known for their million-mile warranty on T-304 stainless systems.
**Can I install this cat-back exhaust system myself?**
Installation difficulty varies by product. Exhaust installations are typically straightforward for experienced home mechanics with access to a lift or proper under-vehicle clearance.
## Real-World Performance
Borla products are validated in the real world, not just on engineering benches. The exhaust hardware you choose for your Borla 2024 Acura Integra Type S ATAK Cat-Back Exhaust System - Coated Black will be asked to perform across a wide range of conditions — temperature extremes, sustained load cycles, rough terrain, and the cumulative stress of thousands of miles in demanding environments. This cat-back exhaust system is engineered to deliver consistent, repeatable performance across all of those conditions.
Exhaust systems face high temperatures from sustained high-RPM operation, road salt and moisture exposure, vibration from drivetrain harmonics, and thermal cycling between hot and cold. Borla's construction standards and materials are chosen specifically to handle these conditions for the long term.
## Build Quality and Value
Borla products are not the cheapest option for your Borla 2024 Acura Integra Type S ATAK Cat-Back Exhaust System - Coated Black. They are not designed to be. Budget components in critical systems create a false economy — the cost of a component failure in a critical system far exceeds the delta between a quality product and a cut-rate alternative. Borla prices reflect genuine engineering investment, quality materials, precise manufacturing, and the validation process that ensures the product performs exactly as specified across its full service life.
For Borla 2024 Acura Integra Type S ATAK Cat-Back Exhaust System - Coated Black owners who depend on their vehicles in demanding conditions, the calculation is straightforward: invest in components that perform when you need them to, last as long as the vehicle, and back that promise with manufacturer warranty coverage.
**What makes the Borla 2024 Acura Integra Type S ATAK Cat-Back Exhaust System - Coated Black a strong platform for exhaust upgrades?**
The Borla 2024 Acura Integra Type S ATAK Cat-Back Exhaust System - Coated Black has an excellent foundation — the platform features robust frame construction, capable stock drivetrain components, and factory exhaust specs that are genuinely competent for average use. The reason aftermarket upgrades make such a difference is precisely because the factory engineers did their job well — the platform can handle more than the factory spec delivers. A Borla cat-back exhaust system lets you access that latent capability.
**Magnuson-Moss Warranty Act:** Under federal law, a manufacturer cannot void your vehicle warranty simply because you installed aftermarket components, unless they can demonstrate the aftermarket part caused the specific failure. Review your warranty terms before installation.
**What makes the Borla 2024 Acura Integra Type S ATAK Cat-Back Exhaust System - Coated Black a strong platform for exhaust upgrades?**
The Borla 2024 Acura Integra Type S ATAK Cat-Back Exhaust System - Coated Black has an excellent foundation — the platform features robust frame construction, capable stock drivetrain components, and factory exhaust specs that are genuinely competent for average use. The reason aftermarket upgrades make such a difference is precisely because the factory engineers did their job well — the platform can handle more than the factory spec delivers. A Borla cat-back exhaust system lets you access that latent capability.
**How long does a Borla cat-back exhaust system last?**
Borla components are designed for service lives that match or exceed the factory equivalent. Proper installation, periodic inspection, and maintenance appropriate to your usage intensity are the primary variables in longevity. Owners running their Borla 2024 Acura Integra Type S ATAK Cat-Back Exhaust System - Coated Black primarily on-road under moderate loads can expect many years of service without attention beyond normal inspection intervals. Owners running aggressive off-road applications should inspect exhaust components more frequently and follow the manufacturer's maintenance recommendations for their usage profile.
**Under the Magnuson-Moss Warranty Act**, a manufacturer cannot void your vehicle warranty simply because you installed aftermarket components, unless they can demonstrate the aftermarket part caused the specific failure. Review your warranty terms before installation and keep records of the parts installed and dates of installation.
Details
The 2.75" diameter Borla(r) Cat-Back(tm) system for the Integra Type S contains an Active Exhaust Valve that allows your vehicle to retain the factory designed valve operation. Includes Wiring Harness Extender for Active Exhaust Valve Actuator. The system also features Borla(r)'s Polyphonic Harmonizer Technology which utilizes patented units that contain pipes of different diameters and lengths to create multiple exhaust notes that harmonize to deliver a clean, rich, full-bodied sound to the Borla(r) mufflers. The mufflers then enhance this sound to the character and volume appropriate to deliver the aggressive ATAK(r) sound with no drone inside the vehicle. System features 3 black coated T-304 stainless steel tips, 1) 4.5" round (center) and 2) round 4" (outer). Systems with polished T-304 stainless steel tips, and carbon fiber tips are also available. Borla(r) Cat-Back(tm) & Axle-Back exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive Borla(r) Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium T-304 austenitic stainless steel, superior to T-400 series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer numerical control (CNC) manufacturing ensures an accurate fit. Best of all, Borla(r) stands behind every system with a Million-Mile Warranty. Just what you'd expect from the world's most experienced (and most winning) exhaust brand.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2025 | Acura | Integra | Type S |
Refund Policy
Bull Strap products are the highest grade cut and sewn items in the automotive industry. We are proud to support USA workers in our bid to manufacture right here in the United States.
WARRANTY
Bull Strap guarantees all products to be free from manufacturer defects for all items for one year, and any color fading (where mentioned) for 2 years from the time of purchase. In the event of a product failure, Bull Strap will decide whether that product should be repaired or replaced after reviewing photos submitted by the customer. Bull Strap will then provide a return shipping label for any product in which the material or stitching were determined to be the root cause. Once received, the product will be repaired or replaced and returned to the customer at no cost.
REFUND POLICY
Seat covers and other custom made items, retain all warranties listed above, but cannot be refunded or exchanged at any time
On non-custom items, if within 30 days of purchase directly from Bull Strap, a customer would like to return an unused product with no modifications, and where the item(s) can be considered 'new in box', the customer can email us at info@bullstrap.com or call us at 951-319-4008. The will be a 15% restocking fee subtracted from any returned items. Once processed, the customer must ship the product back and submit the tracking information. Bull Strap will issue a full refund minus the 15% restocking fee once the item(s) is/are received and determined to be in 'Brand New' condition. NOTE: If a customer ordered Bull Strap products from a dealer, the customer must go through this process directly with the dealer the product was ordered from.
As always, we strive to provide the best product and customer service available...but we are definitely not perfect. If at any time, you have any issues, please contact us, so we can address any problems you may have. Thanks!
Shipping Policy
Coming Soon