## Borla 09-10 Dodge Challenger SRT-8 6.1L Catback Exhaust
If you're driving a 2009–2010 Dodge and you're serious about performance, you already know that factory cat-back exhaust system was engineered to a price point, not a performance target. Borla takes a completely different approach.
Borla Performance Industries has been engineering exhaust systems from their Oxnard, California facility since 1978, and over four decades they've built their reputation on one fundamental principle: sound quality matters as much as performance numbers. Borla's signature exhaust note — aggressive under hard acceleration, civilized at cruise — comes from their proprietary straight-through technology combined with internal baffling that manages tone across the full RPM range. Borla systems are manufactured from aircraft-quality T-304 stainless steel and backed by a million-mile warranty.
The result is this cat-back exhaust system — engineered with the 2009–2010 Dodge specifically in mind, matching spring rates, mounting geometry, and component sizing to what this platform actually demands under real-world conditions.
## Engineering and Technology
Borla's patented straight-through technology eliminates the performance-robbing backpressure of conventional muffler designs while using internal baffling chambers to tune sound frequencies. The result is measurably less restriction than factory systems, which translates directly to horsepower and torque gains across the RPM band. Borla's T-304 stainless construction resists corrosion from road salt and moisture far beyond what mild steel or aluminized systems can achieve — which is why they can offer a lifetime warranty on their materials and construction.
For the 2009–2010 Dodge, these engineering principles translate into direct performance improvements. Dodge owners running this cat-back exhaust system consistently report improved throttle response, noticeable low-end torque gains, and the kind of exhaust note that actually improves the driving experience rather than just being louder.
## Who This Is For
This Borla cat-back exhaust system is designed for 2009–2010 Dodge owners who use their vehicles seriously. Whether your primary use is performance driving, daily driving, towing, this component was engineered to deliver in your specific application.
Factory exhaust systems are engineered for emissions compliance and cost reduction, not for extracting maximum performance from your engine. The factory exhaust exhaust leaves measurable horsepower and torque on the table, and does it with a muted, compressed exhaust note that doesn't do justice to what's actually happening under the hood. This Borla system corrects both issues.
Ideal for: Performance driving · Daily driving · Towing · Truck builds
## Why Upgrade Matters for 2009–2010 Dodge
Factory exhaust components are engineered to a budget and a set of average expectations. The engineering team responsible for the factory spec had to balance cost, mass-market appeal, regulatory compliance, and warranty exposure — none of which prioritize the kind of performance a serious truck or SUV owner actually needs.
The factory exhaust exhaust system uses a muffler design optimized for quiet operation and regulatory compliance, not for extracting performance. The result is measurable backpressure at wide-open throttle — backpressure that directly costs you horsepower and torque. A Borla cat-back exhaust system removes that restriction while engineering the exhaust tone for quality and character, not just volume.
## Installation and Compatibility
This Borla cat-back exhaust system is designed to fit the 2009–2010 Dodge using factory mounting positions and existing hangers. No cutting or welding is required on most configurations. Hardware is included, and all systems are designed to work with factory catalytic converters to maintain emissions compliance.
This product is designed and tested specifically for the 2009–2010 2009–2010 Dodge. If your vehicle has factory performance packages that may affect fitment, verify compatibility using your vehicle's build sheet or contact technical support before ordering.
## Complete Your Build with Bull Strap
If you're upgrading your Dodge's exhaust system, your suspension travel and drivetrain protection deserve the same attention. Bull Strap limit straps are the final piece of the suspension puzzle — engineered and manufactured in the USA to control maximum droop travel and protect your axles, CV joints, and brake lines from overextension under articulation.
Bull Strap limit straps are made in the USA from high-tenacity webbing and proprietary hardware and are the choice of professional fabricators and serious off-road builders who understand that uncontrolled droop is how you destroy expensive components. Pair them with your Borla exhaust upgrade for a complete, properly engineered suspension system.
## Frequently Asked Questions
**Will this Borla cat-back exhaust system fit my 2009–2010 2009–2010 Dodge?**
Yes — this product is designed and validated for the 2009–2010 Dodge (2009–2010). Fitment data is verified against factory specifications. If you have a vehicle with unusual factory options or prior modifications, verify those don't affect the installation before ordering.
**How does Borla's cat-back exhaust system compare to the factory OEM equivalent?**
The factory cat-back exhaust system was designed to a budget and an average use case. Borla's engineering prioritizes performance, durability, and real-world function over cost minimization. In practical terms, you'll notice the difference in throttle response, power delivery under load, and the quality of the exhaust tone across the RPM range.
**Is this cat-back exhaust system covered by a warranty?**
Borla stands behind the quality of their products with manufacturer warranty coverage. Specific warranty terms vary by product line — refer to the product documentation or contact Borla directly for warranty details applicable to this part. Borla is known for their million-mile warranty on their stainless steel systems.
**Can I install this cat-back exhaust system myself, or do I need a professional?**
Installation difficulty varies by cat-back exhaust system and vehicle. Exhaust installations are typically straightforward for experienced home mechanics with access to a lift. The main requirement is a safe way to access the vehicle's underside with adequate clearance to manipulate the new components into place.
## Build Quality and Value
Borla products are not the cheapest option for your 2009–2010 Dodge. They are not designed to be. Budget components in critical systems — exhaust components that your vehicle's capability and, in some cases, safety depend on — create a false economy. The cost of a component failure in a critical system far exceeds the delta between a quality product and a cut-rate alternative. Borla prices reflect genuine engineering investment, quality materials, precise manufacturing, and the validation process that ensures the product performs exactly as specified across its full service life.
For 2009–2010 Dodge owners who depend on their vehicles in demanding conditions, the calculation is straightforward: invest in components that perform when you need them to, last as long as the vehicle, and back that promise with manufacturer warranty coverage. This Borla cat-back exhaust system meets that standard.
For professional builders, fleet managers, and serious enthusiasts who track performance across their builds, Borla's consistent engineering standards mean predictable outcomes. When you specify Borla for a Dodge build, you know what you're getting.
## Real-World Performance Context
Borla products are validated in the real world, not just on engineering benches. The exhaust hardware you choose for your 2009–2010 Dodge will be asked to perform across a wide range of conditions — temperature extremes, sustained load cycles, rough terrain, and the cumulative stress of thousands of miles in demanding environments. This cat-back exhaust system is engineered to deliver consistent, repeatable performance across all of those conditions.
Exhaust systems on trucks and performance vehicles face conditions that expose the quality differences between systems immediately. High temperatures from sustained high-RPM operation, exposure to road salt and moisture, vibration from engine and drivetrain harmonics, and the thermal cycling between hot and cold all stress exhaust system joints, hangers, and tubing. Borla's construction standards and materials are chosen specifically to handle these conditions for the long term.
**What makes the 2009–2010 2009–2010 Dodge a good platform for exhaust upgrades?**
The 2009–2010 Dodge has an excellent foundation — Dodge engineers the platform with robust frame construction, capable stock drivetrain components, and factory exhaust specs that are genuinely competent for average use. The reason aftermarket upgrades make such a difference is precisely because the factory engineers did their job well — the platform can handle more than the factory spec delivers. A Borla cat-back exhaust system lets you access that latent capability.
**How long does this cat-back exhaust system last?**
Borla components are designed for service lives that match or exceed the factory equivalent. Proper installation, periodic inspection, and maintenance appropriate to your usage intensity are the primary variables in longevity. Owners running their 2009–2010 Dodge primarily on-road under moderate loads can expect many years of service without attention. Owners running aggressive off-road applications should inspect exhaust components more frequently and follow the manufacturer's maintenance recommendations.
**Will this affect my 2009–2010 Dodge factory warranty?**
Under the Magnuson-Moss Warranty Act, a manufacturer cannot void your vehicle warranty simply because you installed aftermarket components, unless they can demonstrate the aftermarket part caused the specific failure. That said, review your warranty terms and understand the interaction between your aftermarket components and any open factory warranty claims before installation.
If you're driving a 2009–2010 Dodge and you're serious about performance, you already know that factory cat-back exhaust system was engineered to a price point, not a performance target. Borla takes a completely different approach.
Borla Performance Industries has been engineering exhaust systems from their Oxnard, California facility since 1978, and over four decades they've built their reputation on one fundamental principle: sound quality matters as much as performance numbers. Borla's signature exhaust note — aggressive under hard acceleration, civilized at cruise — comes from their proprietary straight-through technology combined with internal baffling that manages tone across the full RPM range. Borla systems are manufactured from aircraft-quality T-304 stainless steel and backed by a million-mile warranty.
The result is this cat-back exhaust system — engineered with the 2009–2010 Dodge specifically in mind, matching spring rates, mounting geometry, and component sizing to what this platform actually demands under real-world conditions.
## Engineering and Technology
Borla's patented straight-through technology eliminates the performance-robbing backpressure of conventional muffler designs while using internal baffling chambers to tune sound frequencies. The result is measurably less restriction than factory systems, which translates directly to horsepower and torque gains across the RPM band. Borla's T-304 stainless construction resists corrosion from road salt and moisture far beyond what mild steel or aluminized systems can achieve — which is why they can offer a lifetime warranty on their materials and construction.
For the 2009–2010 Dodge, these engineering principles translate into direct performance improvements. Dodge owners running this cat-back exhaust system consistently report improved throttle response, noticeable low-end torque gains, and the kind of exhaust note that actually improves the driving experience rather than just being louder.
## Who This Is For
This Borla cat-back exhaust system is designed for 2009–2010 Dodge owners who use their vehicles seriously. Whether your primary use is performance driving, daily driving, towing, this component was engineered to deliver in your specific application.
Factory exhaust systems are engineered for emissions compliance and cost reduction, not for extracting maximum performance from your engine. The factory exhaust exhaust leaves measurable horsepower and torque on the table, and does it with a muted, compressed exhaust note that doesn't do justice to what's actually happening under the hood. This Borla system corrects both issues.
Ideal for: Performance driving · Daily driving · Towing · Truck builds
## Why Upgrade Matters for 2009–2010 Dodge
Factory exhaust components are engineered to a budget and a set of average expectations. The engineering team responsible for the factory spec had to balance cost, mass-market appeal, regulatory compliance, and warranty exposure — none of which prioritize the kind of performance a serious truck or SUV owner actually needs.
The factory exhaust exhaust system uses a muffler design optimized for quiet operation and regulatory compliance, not for extracting performance. The result is measurable backpressure at wide-open throttle — backpressure that directly costs you horsepower and torque. A Borla cat-back exhaust system removes that restriction while engineering the exhaust tone for quality and character, not just volume.
## Installation and Compatibility
This Borla cat-back exhaust system is designed to fit the 2009–2010 Dodge using factory mounting positions and existing hangers. No cutting or welding is required on most configurations. Hardware is included, and all systems are designed to work with factory catalytic converters to maintain emissions compliance.
This product is designed and tested specifically for the 2009–2010 2009–2010 Dodge. If your vehicle has factory performance packages that may affect fitment, verify compatibility using your vehicle's build sheet or contact technical support before ordering.
## Complete Your Build with Bull Strap
If you're upgrading your Dodge's exhaust system, your suspension travel and drivetrain protection deserve the same attention. Bull Strap limit straps are the final piece of the suspension puzzle — engineered and manufactured in the USA to control maximum droop travel and protect your axles, CV joints, and brake lines from overextension under articulation.
Bull Strap limit straps are made in the USA from high-tenacity webbing and proprietary hardware and are the choice of professional fabricators and serious off-road builders who understand that uncontrolled droop is how you destroy expensive components. Pair them with your Borla exhaust upgrade for a complete, properly engineered suspension system.
## Frequently Asked Questions
**Will this Borla cat-back exhaust system fit my 2009–2010 2009–2010 Dodge?**
Yes — this product is designed and validated for the 2009–2010 Dodge (2009–2010). Fitment data is verified against factory specifications. If you have a vehicle with unusual factory options or prior modifications, verify those don't affect the installation before ordering.
**How does Borla's cat-back exhaust system compare to the factory OEM equivalent?**
The factory cat-back exhaust system was designed to a budget and an average use case. Borla's engineering prioritizes performance, durability, and real-world function over cost minimization. In practical terms, you'll notice the difference in throttle response, power delivery under load, and the quality of the exhaust tone across the RPM range.
**Is this cat-back exhaust system covered by a warranty?**
Borla stands behind the quality of their products with manufacturer warranty coverage. Specific warranty terms vary by product line — refer to the product documentation or contact Borla directly for warranty details applicable to this part. Borla is known for their million-mile warranty on their stainless steel systems.
**Can I install this cat-back exhaust system myself, or do I need a professional?**
Installation difficulty varies by cat-back exhaust system and vehicle. Exhaust installations are typically straightforward for experienced home mechanics with access to a lift. The main requirement is a safe way to access the vehicle's underside with adequate clearance to manipulate the new components into place.
## Build Quality and Value
Borla products are not the cheapest option for your 2009–2010 Dodge. They are not designed to be. Budget components in critical systems — exhaust components that your vehicle's capability and, in some cases, safety depend on — create a false economy. The cost of a component failure in a critical system far exceeds the delta between a quality product and a cut-rate alternative. Borla prices reflect genuine engineering investment, quality materials, precise manufacturing, and the validation process that ensures the product performs exactly as specified across its full service life.
For 2009–2010 Dodge owners who depend on their vehicles in demanding conditions, the calculation is straightforward: invest in components that perform when you need them to, last as long as the vehicle, and back that promise with manufacturer warranty coverage. This Borla cat-back exhaust system meets that standard.
For professional builders, fleet managers, and serious enthusiasts who track performance across their builds, Borla's consistent engineering standards mean predictable outcomes. When you specify Borla for a Dodge build, you know what you're getting.
## Real-World Performance Context
Borla products are validated in the real world, not just on engineering benches. The exhaust hardware you choose for your 2009–2010 Dodge will be asked to perform across a wide range of conditions — temperature extremes, sustained load cycles, rough terrain, and the cumulative stress of thousands of miles in demanding environments. This cat-back exhaust system is engineered to deliver consistent, repeatable performance across all of those conditions.
Exhaust systems on trucks and performance vehicles face conditions that expose the quality differences between systems immediately. High temperatures from sustained high-RPM operation, exposure to road salt and moisture, vibration from engine and drivetrain harmonics, and the thermal cycling between hot and cold all stress exhaust system joints, hangers, and tubing. Borla's construction standards and materials are chosen specifically to handle these conditions for the long term.
**What makes the 2009–2010 2009–2010 Dodge a good platform for exhaust upgrades?**
The 2009–2010 Dodge has an excellent foundation — Dodge engineers the platform with robust frame construction, capable stock drivetrain components, and factory exhaust specs that are genuinely competent for average use. The reason aftermarket upgrades make such a difference is precisely because the factory engineers did their job well — the platform can handle more than the factory spec delivers. A Borla cat-back exhaust system lets you access that latent capability.
**How long does this cat-back exhaust system last?**
Borla components are designed for service lives that match or exceed the factory equivalent. Proper installation, periodic inspection, and maintenance appropriate to your usage intensity are the primary variables in longevity. Owners running their 2009–2010 Dodge primarily on-road under moderate loads can expect many years of service without attention. Owners running aggressive off-road applications should inspect exhaust components more frequently and follow the manufacturer's maintenance recommendations.
**Will this affect my 2009–2010 Dodge factory warranty?**
Under the Magnuson-Moss Warranty Act, a manufacturer cannot void your vehicle warranty simply because you installed aftermarket components, unless they can demonstrate the aftermarket part caused the specific failure. That said, review your warranty terms and understand the interaction between your aftermarket components and any open factory warranty claims before installation.
Details
The BORLA® sound of power. Its been described as asonic shot of adrenaline. An intoxicating concert ofsteel, gears and combustion that echoes from thespeedways, deserts and highways of the world.The sound of more victory laps than any otherbrand, the BORLA® exhaust note has become the quintessentioal soundtrack of high-performance motoring. And like all good automotive designs there is function behing the form. As any driving enthusiast knows, the sound of an exhaust provides more than just ear candy. Its a communications conduit between car and driver. A link between human and machine. The exhaust sound provides accoustic feedback of engine rpm to aid the driver in critical decisions such as gear selection or throttle input in rev-match shifting. At BORLA®, we understand this concept better than any exhaust manufacturer. Combining patented technology with computer modeling, extensive prototyping and advanced sound analysis tools. BORLA® engineers spend countless hours tuning exhaust systems to best reflect the personality and performance of vehicle applications. The result is an enhanced driving experience. With unrivaled clarity, the BORLA® exhaust note can help a driver stay within the powerband through a difficult section, using the exciting sensory feedback of sound. With unrivaled clarity the Borla exhaust note can help a driver stay within the powerband through a difficult section, using the exciting sensry feedback of sound.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2008-2010 | Dodge | Challenger | SRT8 |
Refund Policy
Bull Strap products are the highest grade cut and sewn items in the automotive industry. We are proud to support USA workers in our bid to manufacture right here in the United States.
WARRANTY
Bull Strap guarantees all products to be free from manufacturer defects for all items for one year, and any color fading (where mentioned) for 2 years from the time of purchase. In the event of a product failure, Bull Strap will decide whether that product should be repaired or replaced after reviewing photos submitted by the customer. Bull Strap will then provide a return shipping label for any product in which the material or stitching were determined to be the root cause. Once received, the product will be repaired or replaced and returned to the customer at no cost.
REFUND POLICY
Seat covers and other custom made items, retain all warranties listed above, but cannot be refunded or exchanged at any time
On non-custom items, if within 30 days of purchase directly from Bull Strap, a customer would like to return an unused product with no modifications, and where the item(s) can be considered 'new in box', the customer can email us at info@bullstrap.com or call us at 951-319-4008. The will be a 15% restocking fee subtracted from any returned items. Once processed, the customer must ship the product back and submit the tracking information. Bull Strap will issue a full refund minus the 15% restocking fee once the item(s) is/are received and determined to be in 'Brand New' condition. NOTE: If a customer ordered Bull Strap products from a dealer, the customer must go through this process directly with the dealer the product was ordered from.
As always, we strive to provide the best product and customer service available...but we are definitely not perfect. If at any time, you have any issues, please contact us, so we can address any problems you may have. Thanks!
Shipping Policy
Coming Soon