Photo - Primary
User 1
User 1
User 3

Banks Power 2007.5-2012 Ram 6.7L Monster-Ram Intake System Gen-2 w/Fuel Line - Red w/Heater System

$831.33 $770.06 SAVE 7%
In Stock Pre order Out of stock
Add to Wishlist
Details
Banks Monster-Ram improves throttle response and fuel economy by eliminating airflow restrictions. Prevents severe engine damage by replacing the killer grid heater with the Banks high-flow billet intake plate. The factory heater can't fail if it's not there. Monster-Ram is the only 50-state emissions-compliant RAM intake elbow.Key Features:-Raises boost without increasing turbine drive pressure-Larger and less restrictive than stock intake-Improves flow of oxygen-rich air into cylinders-Quicker throttle response-Optimizes air pressure and distribution-Outflows stock over 88.3%-3-3/8 inch inlet-Four 1/8 inch NPT ports-Accommodates stock mounting points-Includes proprietary fuel line and all necessary hardware-Red powder-coated, Black or Raw finish

This Part Fits:

Year Make Model Submodel
2007-2010 Dodge Ram 2500 Laramie
2007-2010 Dodge Ram 2500 SLT
2007-2010 Dodge Ram 2500 ST
2008-2010 Dodge Ram 2500 SXT
2010 Dodge Ram 2500 TRX
2007-2010 Dodge Ram 3500 Laramie
2007-2010 Dodge Ram 3500 SLT
2007 Dodge Ram 3500 Sport
2007-2010 Dodge Ram 3500 ST
2008-2009 Dodge Ram 3500 SXT
2011-2012 Ram 2500 Laramie
2011-2012 Ram 2500 Laramie Longhorn
2012 Ram 2500 Outdoorsman
2011-2012 Ram 2500 SLT
2011-2012 Ram 2500 ST
2011-2012 Ram 3500 Laramie
2011-2012 Ram 3500 Laramie Longhorn
2011-2012 Ram 3500 SLT
2011-2012 Ram 3500 ST
Refund Policy

Bull Strap products are the highest grade cut and sewn items in the automotive industry. We are proud to support USA workers in our bid to manufacture right here in the United States.

WARRANTY

Bull Strap guarantees all products to be free from manufacturer defects for all items for one year, and any color fading (where mentioned) for 2 years from the time of purchase. In the event of a product failure, Bull Strap will decide whether that product should be repaired or replaced after reviewing photos submitted by the customer. Bull Strap will then provide a return shipping label for any product in which the material or stitching were determined to be the root cause. Once received, the product will be repaired or replaced and returned to the customer at no cost.

REFUND POLICY

Seat covers and other custom made items, retain all warranties listed above, but cannot be refunded or exchanged at any time

On non-custom items, if within 30 days of purchase directly from Bull Strap, a customer would like to return an unused product with no modifications, and where the item(s) can be considered 'new in box', the customer can email us at info@bullstrap.com or call us at 951-319-4008. The will be a 15% restocking fee subtracted from any returned items. Once processed, the customer must ship the product back and submit the tracking information. Bull Strap will issue a full refund minus the 15% restocking fee once the item(s) is/are received and determined to be in 'Brand New' condition. NOTE: If a customer ordered Bull Strap products from a dealer, the customer must go through this process directly with the dealer the product was ordered from.

As always, we strive to provide the best product and customer service available...but we are definitely not perfect. If at any time, you have any issues, please contact us, so we can address any problems you may have. Thanks!

Shipping Policy

Coming Soon