Autometer Accessories 0-100PSI 1/8in. NPT Male Oil Pressure Sensor (For Short Sweep Elec.)

Innovate Replacement Ethanol Sensor Cable for MTX-D/ECB-1/ECF-1

When you install a set of BBK Performance long tube exhaust headers on your muscle car or truck, the O2 sensor locations are relocated on the BBK header and mid...

Torque Solution Billet Boost Tap - Toyota Supra A90/A91 MKV / BMW B48/B58 / G Series Chassis - Black

This throttle position sensor is designed for use with Holley style racing carburetors (Holley, Demon, QFT, etc.) which do not utilize a choke. The included bracketry and arm style for...

Innovate SSI-4 Plug and Play 0-150PSI (10 Bar) Air/Fluid Pressure SensorInstallation Instructions

Innovate SSI-4 Plug and Play 4 Bar Map SensorInstallation Instructions

The Evolution Of The Worlds Most Popular Stand Alone Digital O2 Sensor Controller, The Innovate Motorsports Lc-2 Builds Upon The Legacy Of The Lc-1 By Adding Simplicity And Leading Edge...

This Type K thermocouple from Innovate Motorsports may be utilized for monitoring exhaust gas temperatures (EGT) with TC-4 PLUS, LMA-3, DL-32, and TC-4 products equipped with thermocouple channel(s).

The Serial Program Cable will allow you to connect any of the following Innovate Motorsports devices to your PC. (LC-1, XD-16, LMA-3, DL-32, SSI-4, TC-4)

This Adapter is recommended for connecting computers without Serial ports to Innovate Motorsports devices using LM Programmer or Logworks softwares. This cable will convert Serial to USB. Hardware drivers included.

OMIX proudly offers all the parts you need to keep your Willys/Jeep running like new with quality standards that always meet or exceed those of the factory part. This replacement...

Fragola -4ANx 1/8 FPT Gauge Adapter-Straight - Black

Fragola -4ANx 1/8 FPT Gauge Adapter-Straight

BLOX Racing TPS for Honda B / D / H / F series engines - AllThis Part Fits: Year Make Model Submodel 1990-1993,1997-2001 Acura Integra GS 1994-2001 Acura Integra GS-R...

A Throttle position sensor or TPS sensor is a sensor used by the cars ECU to monitor the throttle position on modern fuel injected cars. The sensor is usually located...

When you install a set of BBK Performance long tube exhaust headers on your muscle car or truck, the O2 sensor locations are relocated on the BBK header and mid...

All BBK Performance parts are backed by a 1-YEAR manufacturer’s warranty from the original date of purchase. An optional extended warranty is also available - giving you an additional 2...

These pressure transducers are designed to measure fluid pressure in relation to ambient pressure. Compatible with a wide array of common automotive fluid types including but not limited to water...

Garrett Various Speed Sensor w/o Gauge (Pro) for G Series Models

Haltech WB2 Dual Channel CAN O2 Wideband Controller Kit

Haltech WB1 Single Channel CAN NTK O2 Wideband Controller Kit

Haltech Nexus R3 1.625in Tube Mount Kit

Haltech iC-7 Display Dash 1.25in Bar Mount

Torque Solution Boost Tap: Volkswagen 2.0T / AudiThis Part Fits: Year Make Model Submodel 2009-2014 Audi A4 Base 2009 Audi A4 Cabriolet 2009-2012 Audi A4 Quattro Avant 2009-2014 Audi A4...

Torque Solution Billet Boost Tap - BMW (B46 2.0L/B48 2.0L/B58 3.0L)

Torque Solution Billet Boost Tap Ford Focus RS 2016+ / Mustang Ecoboost 15+

Fragola Inline Gauge Adapter -8AN Male x -8AN Fem - Black

Fragola Inline Gauge Adapter -6AN Male x -6AN Fem - Black

Revel VLS Oil Pressure Sensor

Revel VLS Oil Temp Sensor

Innovate Pressure Sensor 0-150PSI (10 Bar) Air/Fluid w/Harness (Replacement for 3913,3903,3910)

Innovate Ethanol Content Sensor (Continental)

It is also possible to verify which sensor is currently being used by connecting your Innovate product to the LM Programmer software.

It is also possible to verify which sensor is currently being used by connecting your Innovate product to the LM Programmer software.

It is also possible to verify which sensor is currently being used by connecting your Innovate product to the LM Programmer software.

Vacuum Hose, T-Fitting, & Clamp Kit (for most boost controllers)

The Evolution Of The Worlds Most Popular Stand Alone Digital O2 Sensor Controller, The Innovate Motorsports Lc-2 Builds Upon The Legacy Of The Lc-1 By Adding Simplicity And Leading Edge...

The Evolution Of The Worlds Most Popular Stand Alone Digital O2 Sensor Controller, The Innovate Motorsports Lc-2 Builds Upon The Legacy Of The Lc-1 By Adding Simplicity And Leading Edge...

4ft serial patch cable (4pin to 4pin) for LM-2, LC-2, and MTX series gauges.

It is also possible to verify which sensor is currently being used by connecting your Innovate product to the LM Programmer software.

The Serial Program Cable will allow you to connect the MTX series gauges, LM-2, LC-2 SCG-1, PSB-1, and PSN-1 to your PC.

Inductive Clamp Engine RPM Pickup Accessory for LM-2.

This convenient, easy to use, and durable suction cup type Window Mount will allow you to have the LM-2 mounted to your windshield for ease of access and viewing while...

Analog Input and Output Accessory Cable for LM-2 (Needed for RPM Input).

It is also possible to verify which sensor is currently being used by connecting your Innovate product to the LM Programmer software.

OBD-II / CAN Interface Accessory Cable for LM-2.

Not all SD cards are compatible with Innovate Motorsports products. This card has been tested and approved for use.

Innovate 4 BAR MAP Sensor for MTX-D / SCG-1

Haltech WB1 Single Channel CAN O2 Wideband Controller Kit