Camshaft & Lifter Kits — Lift More, Clear More, Go Further

A lift kit raises your truck, SUV, or Jeep to create clearance for larger tires, improve approach and departure angles, and give the suspension room to articulate on rough terrain. Whether you're leveling a nose-down half-ton pickup for better stance and tire clearance, or building a dedicated trail rig with 6" of lift and 37" tires, the right lift kit changes what your vehicle can do — and where it can go.

Types of Lift Kits

Leveling Kit (1"–2.5")

Raises the front to match the rear height. The simplest, cheapest lift option. Works by adding a spacer above the front struts or coils. Allows 33"–34" tires on most trucks without body modifications.

Spacer Lift (1.5"–3")

Uses a spacer block or strut spacer to raise ride height without replacing the factory shock/strut. More lift than a leveling kit; may require minor modifications for larger tires.

Suspension Lift (2"–6"+)

Replaces or significantly modifies suspension components — new coils or leaf springs, new shocks, often new control arms, track bars, and associated hardware. The most comprehensive option; full control over ride quality and performance.

Body Lift (1"–3")

Uses spacer blocks between the body and frame to raise the body without altering suspension geometry. Creates tire clearance without affecting suspension travel. Often combined with a suspension lift for maximum height.

Lift Height and Tire Sizing

Tire size is the most common reason people lift their truck or SUV. Here's a rough guide by lift height:

• Stock to 1.5" lift: 31"–32" tires on most trucks (may require slight trimming)
• 2"–2.5" lift: 33"–34" tires without major modifications
• 3"–3.5" lift: 35" tires with minor fender trimming
• 4"–5" lift: 35"–37" tires; may require UCA replacement
• 6"+ lift: 37"–40" tires; full suspension system replacement required

These are generalizations. Actual clearance depends on wheel offset, backspacing, tire section width, and the specific vehicle's fender geometry. Check the product listing for tire size guidance specific to your vehicle.

Lift Kit Components

A complete suspension lift kit for a typical truck includes:

• Front coil springs or torsion bar keys (IFS trucks) or leaf spring add-a-leafs (solid front axle)
• Rear leaf spring blocks, add-a-leafs, or replacement rear coil springs
• Front and rear shocks (new length to match the lift)
• Upper control arms (required on many IFS trucks for 3"+ lifts to restore alignment geometry)
• Track bar drop bracket (on solid front axle trucks and Jeeps to correct caster)
• Sway bar end links (extended for lifted geometry)
• Brake line extensions (for lifts that stretch factory brake hose routing)
• Differential drop spacers (on IFS trucks to reduce CV axle angle)

Not all kits include all components — read the product description carefully to understand what's in the box and what additional parts your specific vehicle will need.

Fitment

Lift kits are vehicle-specific. Year, make, model, cab configuration, bed length, and drivetrain all matter. Every product listing in this collection includes a complete fitment table. Check your vehicle's year, make, model, and trim before ordering — a kit designed for a 2019 Ford F-150 XLT 4WD does not fit a 2019 F-150 FX4 without confirmation, because suspension configurations vary even within a model year.

After a Lift: What You Need to Check

A lift changes your suspension geometry. Several things need attention after installation:

• Alignment: Mandatory. Budget for a full four-wheel alignment immediately after installation.
• Driveshaft angles: On lifted trucks, driveshaft angles change. Extended-travel driveshafts or carrier bearing drops may be needed.
• ABS sensor wires and brake lines: Check routing and ensure nothing is stretched or contacting suspension components.
• Steering geometry: Verify bump steer is acceptable. On some platforms, extended steering components are needed.
• TPMS and speedometer: If you're changing tire size, your speedometer and TPMS thresholds may need recalibration.

Shop Camshaft & Lifter Kits at Bull Strap

Every lift kit in this collection includes full fitment details, component lists, and lift height specifications by vehicle. Shop by your vehicle to find kits confirmed for your year, make, model, and trim. Questions about what your specific truck needs? Reach out — we can help you spec the right lift for your goals and budget.

About Bull Strap's Catalog

Bull Strap sources from Turn14 Distribution, one of the largest automotive aftermarket distributors in North America, carrying over 103,000 products across hundreds of brands. Every product listing includes a complete fitment table by year, make, model, and trim so you can confirm compatibility before you order. The catalog covers suspension, wheels and tires, exterior accessories, interior accessories, lighting, exhaust, engine performance, recovery gear, and every major truck accessory category.

Bull Strap's catalog is built around the vehicles that matter most to truck and off-road owners. Full-size trucks from Ford, Ram, Chevrolet, and GMC represent the largest portion of the fitment data. Toyota trucks and SUVs including the Tacoma, Tundra, and 4Runner are strongly represented. Jeep Wranglers, Gladiators, and off-road-specific platforms round out the coverage. Midsize trucks including the Colorado, Canyon, Ranger, and Frontier are covered where Turn14 carries fitment data for the category.

Fitment by Vehicle

Every product in the Bull Strap catalog includes fitment data from the Turn14 distribution system, verified against vehicle-specific mounting configurations, dimensions, and compatibility requirements. Coverage spans the following platforms:

• Ford F-150 (2004-present), F-250 and F-350 Super Duty (2005-present), Bronco (2021-present), Ranger (2019-present)
• Ram 1500 (2009-present), Ram 2500 and 3500 (2010-present)
• Chevrolet Silverado 1500 (2007-present), Silverado 2500HD and 3500HD (2011-present), Colorado (2015-present)
• GMC Sierra 1500 (2007-present), Sierra 2500HD and 3500HD (2011-present), Canyon (2015-present)
• Toyota Tacoma (2005-present), Tundra (2007-present), 4Runner (2003-present), Sequoia (2008-present)
• Jeep Wrangler TJ (1997-2006), Wrangler JK (2007-2018), Wrangler JL (2018-present), Gladiator JT (2020-present)
• Nissan Frontier (2005-present), Titan (2004-present), Titan XD (2016-present)

Always verify fitment on the individual product page before ordering. Trim level, cab configuration, bed length, engine, and drivetrain all affect compatibility for vehicle-specific parts.

Brands in the Bull Strap Catalog

The brand lineup at Bull Strap through Turn14 Distribution spans the full spectrum of the truck and off-road aftermarket. Suspension brands include Bilstein, Fox, Rancho, KYB, Monroe, ICON Vehicle Dynamics, Old Man Emu, Carli Suspension, Eibach, ReadyLift, Rough Country, Fabtech, Skyjacker, and SuperLift. Recovery brands include Warn, Smittybilt, ARB, Hi-Lift Jack, Bubba Rope, and Factor 55. Lighting brands include Rigid Industries, Baja Designs, KC HiLiTES, Diode Dynamics, and Anzo. Exterior brands include Lund, Bushwacker, WeatherTech, LineX, Dee Zee, Undercover, and Extang. Interior brands include Husky Liners, WeatherTech, Covercraft, Coverking, Bestop, and Rugged Ridge. OEM-quality replacement parts come from Dorman, Moog, Gates, Monroe, and Standard Motor Products.

Not every brand from the Turn14 catalog is represented in every collection. If you are searching for a specific brand that does not appear in the current listings, use the site search bar or contact Bull Strap directly. The catalog is large and search sometimes surfaces only a portion of available inventory.

Choosing Between OEM Replacement and Performance Upgrade

The aftermarket parts market offers two fundamentally different value propositions for almost every part category: OEM-quality replacement and performance upgrade. Understanding which one your vehicle and use case actually needs saves money and prevents buying the wrong part.

OEM-quality replacement parts are engineered to restore a vehicle to factory specification after a component fails or wears out. Brands like Moog, Dorman, Monroe, and Gates occupy this space. These are often higher quality than the original factory parts at a lower cost than dealer pricing. The goal is factory-level performance, not improved performance.

Performance upgrade parts are engineered to exceed factory specifications in specific ways. Improved damping, greater strength, better adjustability, extended service life under severe use, or expanded travel for lifted applications. Brands like Bilstein, Fox, Carli Suspension, ICON Vehicle Dynamics, and Eibach occupy this space. Higher cost, but measurable improvement in the targeted performance areas.

Match the part to the actual use case. A daily driver with worn shocks needs OEM-quality replacement, not a remote-reservoir performance shock at three times the price. A dedicated off-road truck being built for serious trail use needs performance upgrades, not OEM-spec replacements that will wear faster under the increased demands of the build.

Bull Strap's USA-Made Limit Strap

Bull Strap's signature product is the USA-made limit strap, engineered and manufactured in the United States specifically for lifted trucks and serious off-road builds. Limit straps cap the droop travel of lifted suspension systems, protecting CV axles, brake lines, and ABS sensor wires from overextension at full droop on the trail or in a ditch. They are one of the most critical and most overlooked components on any seriously lifted truck. Every lifted truck with independent front suspension or a solid axle setup running more than two inches of lift should have limit straps protecting the drivetrain.

Every limit strap from Bull Strap is made in the USA using high-tenacity polyester webbing, solid steel hardware, and heat-shrink tubing on every connection point. Built to withstand the repeated load cycles of serious off-road use without stretching, degrading, or failing. The Turn14 catalog of 103,000 products is the primary product surface at Bull Strap, but the limit strap is where the brand started and remains the product that defines the brand.

Installation and Compatibility

Every product listing in this collection includes installation information where the manufacturer provides it. Difficulty ratings, required tools, and estimated installation time are on product pages where the manufacturer supplies that data. For parts that require specific vehicle knowledge or alignment work, professional installation is recommended if you do not have the mechanical background and equipment to do the job correctly. Torque specifications matter: under-torqued fasteners back out under vibration; over-torqued fasteners strip threads or crack housings. Always follow manufacturer torque specs rather than estimating from feel or experience with a different part.

For straightforward bolt-on accessories and direct replacement parts, most installations are within reach of a mechanically capable owner with basic hand tools, a floor jack, and safety stands. Jack stands are not optional on any job that requires getting under a lifted vehicle. Use them every time without exception.

Returns and Fitment Verification

Fitment errors are the most common cause of returns in the truck accessory market. The best way to avoid them is to verify fitment from the product page before ordering, cross-checking your vehicle's year, make, model, trim, cab configuration, bed length, and drivetrain against the fitment table. When a product page lists multiple trim levels or configurations, confirm your specific trim is listed before purchasing. If you are not certain, contact Bull Strap before placing the order. Avoiding a return saves time, shipping cost, and the wait for the correct part to arrive.

Shop Camshaft & Lifter Kits at Bull Strap

Full specifications, fitment tables, brand information, and warranty details are on every product page. Use the vehicle fitment filter to narrow results to confirmed-compatible products for your year, make, model, and trim. If you need help finding a specific part or confirming fitment for an unusual application, reach out. Bull Strap carries a large catalog sourced from Turn14 Distribution and can help you locate what you need from the over 103,000 products available through that network.